8035540 Festo Pressure Sensors

8035540 Product Details

• Electrical connection for input 1, connection pattern
  00995428
• Electrical connection 1, number of pins/wires
  4
• Symbol
  00995685
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Note on materials
  RoHS-compliant
• Accuracy in ± % FS
  1.5 %FS
• Switching output
  2 x PNP or 2 x NPN switchable
• Short-circuit protection
  yes
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, process data width OUT
  0 Byte
• IO-Link®, minimum cycle time
  3 ms
• Reverse polarity protection
  for all electrical connections
• Display type
  Illuminated LCD
• Setting range threshold value
  0 % ... 100 %
• KC characters
  KC EMC
• Overload pressure
  72.5 psi
• Measured variable
  Relative pressure
• Information on operating and pilot media
  Operation with oil lubrication possible
• Switching function
  Window comparator Auto difference monitoring
• Min. load resistance of voltage output
  20 kOhm
Protocol
IO-Link®
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
IO-Link®, process data width IN
2 Byte
Housing material
PA-reinforced
Displayable unit(s)
MPa psi
Setting range hysteresis
0 % ... 90 %
Electrical connection 1, connection technology
Connection diagram L1J
Pressure measuring range initial value
-1 bar
Certification
RCM compliance mark c UL us - Listed (OL)
Method of measurement
Piezoresistive pressure sensor
Ambient temperature
0 °C ... 50 °C
Repetition accuracy in ± %FS
0.3 %FS
Max. load resistance of current output
500 Ohm
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, data memory required
500 byte
Product weight
34 g
Setting options
IO-Link® Via display and pushbuttons
Degree of protection
IP40
Type code
SPAN
Electrical connection 1, connection type
Plug
Pressure measuring range end value
1 bar
Certificate issuing authority
UL E322346
Max. overload pressure
5 bar
Temperature of medium
0 °C ... 50 °C
Switching element function
N/C contact/N/O contact switchable
Max. output current
100 mA
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
Type of mounting
Front panel mounting With wall/surface bracket
Mounting position
Any
Materials in contact with the media
FPM PA-reinforced
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Analog output
0 - 10 V 1 - 5 V
IO-Link®, function classes
Binary data channel (BDC) Teach channel
DC operating voltage range
15 V ... 30 V
Pneumatic connection
Internal thread M5
Protection against tampering
IO-Link® PIN code

Product condition

Related documents 8035540 Specs