8035304 Festo Pressure Sensors

8035304 Product Details

• Symbol
  00995410
• Pressure measuring range initial value
  0 bar
• Max. overload pressure
  15 bar
• Analog output
  0 - 10 V 1 - 5 V
• IO-Link®, profile
  Smart sensor profile
• Electrical connection for input 1, connection pattern
  00995386
• Electrical connection 1, number of pins/wires
  4
• Method of measurement
  Piezoresistive pressure sensor
• Temperature of medium
  0 °C ... 50 °C
• Repetition accuracy in ± %FS
  0.3 %FS
• Max. output current
  100 mA
• Short-circuit protection
  yes
• Protocol
  IO-Link®
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, process data width OUT
  0 Byte
• Reverse polarity protection
  for all electrical connections
• Product weight
  80 g
• Electrical connection 1, connection type
  Plug
• Note on materials
  RoHS-compliant
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Switching function
Freely programmable
Switching element function
N/C contact/N/O contact switchable
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Type of mounting
On service unit
Setting options
IO-Link® Via display and pushbuttons
Protection against tampering
IO-Link® PIN code
Electrical connection 1, connection technology
M12x1 A-coded as per EN 61076-2-101
Certification
RCM compliance mark c UL us - Listed (OL)
Measured variable
Relative pressure
Information on operating and pilot media
Operation with oil lubrication possible
ADC resolution
12 bit
Accuracy in ± % FS
1.5 %FS
Max. load resistance of current output
500 Ohm
IO-Link®, function classes
Binary data channel (BDC) Teach channel
DC operating voltage range
20 V ... 30 V
Mounting position
Any
Setting range threshold value
0 % ... 100 %
Degree of protection
IP65
Type code
SPAU
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Pressure measuring range end value
10 bar
Ambient temperature
0 °C ... 50 °C
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Switching output
2 x PNP or 2 x NPN switchable
Min. load resistance of voltage output
10 kOhm
Rise time
3 ms
IO-Link®, SIO mode support
Yes
IO-Link®, data memory required
500 byte
Pneumatic connection
Flange
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
3 ms
Display type
Illuminated LCD
Displayable unit(s)
MPa psi
Setting range hysteresis
0 % ... 90 %

Product condition

Related documents 8035304 Specs