8030615 Festo Quarter Turn Actuators

8030615 Product Details

• Shaft connection
  T14
• Size of valve actuator
  0030
• End-position adjusting range at 0°
  -1 deg ... 9 deg
• Information on the end-position adjusting range
  One end position optionally adjustable
• Cushioning
  No cushioning
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• ATEX category for dust
  II 2D
• Ambient temperature
  -20 °C ... 150 °C
• Spring return torque at 0° swivel angle
  20 Nm
• End-position adjusting range at nominal swivel angle
  81 deg ... 91 deg
• Mode of operation
  Single-acting
• Symbol
  00991266
• ATEX category gas
  II 2G
• Type of (ignition) protection for dust
  Ex h IIIC T85°C...T200°C Db X
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Flange hole pattern
  F04
• Type code
  DAPS
• Closing direction
  Clockwise closing
• Connection pressure for spring force
  5.6 bar
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 0° swivel angle
30 Nm
Torque at nominal operating pressure and 90° swivel angle
20 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
1.19 l
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Material of screws
High-alloy steel
Swivel angle
90 deg
Depth shaft connection
16.5 mm
Standard connection for valve
ISO 5211
Position sensing
None
Operating pressure
5.6 bar ... 8.4 bar
Explosive ambient temperature
-20°C <= Ta <= +150°C
Corrosion resistance class (CRC)
3 - High corrosion stress
Spring return torque with 50° swivel angle
15 Nm
Spring force
4
Pneumatic connection
G1/8
Shaft material
High-alloy steel
Mounting position
Any
Design
Scotch yoke system
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 50° swivel angle
15 Nm
Product weight
1950 g
Material number for shaft
1.4305
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Spring return torque with 90° swivel angle
30 Nm
Seals material
FPM PTFE-reinforced
Cover material
Wrought aluminum alloy
Housing material
Wrought aluminum alloy

Product condition

Related documents 8030615 Specs