8030613 Festo Quarter Turn Actuators

8030613 Product Details

• Swivel angle
  90 deg
• Depth shaft connection
  13.2 mm
• Cushioning
  No cushioning
• Closing direction
  Clockwise closing
• Connection pressure for spring force
  5.6 bar
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Spring return torque with 50° swivel angle
  7.5 Nm
• Shaft connection
  T11
• Pneumatic connection
  G1/8
• Size of valve actuator
  0015
• Type code
  DAPS
• Mounting position
  Any
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• ATEX category for dust
  II 2D
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Torque at nominal operating pressure and 0° swivel angle
  15 Nm
• Spring return torque at 0° swivel angle
  10 Nm
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  0.63 l
Material of screws
High-alloy steel
Standard connection for valve
ISO 5211
Position sensing
None
ATEX category gas
II 2G
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Ambient temperature
-20 °C ... 150 °C
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Spring force
4
Cover material
Wrought aluminum alloy
Material number for shaft
1.4305
End-position adjusting range at 0°
-1 deg ... 9 deg
Mode of operation
Single-acting
Corrosion resistance class (CRC)
3 - High corrosion stress
Torque at nominal operating pressure and 90° swivel angle
10 Nm
Seals material
FPM PTFE-reinforced
Flange hole pattern
F03 F05
End-position adjusting range at nominal swivel angle
81 deg ... 91 deg
Information on the end-position adjusting range
One end position optionally adjustable
Design
Scotch yoke system
Symbol
00991266
Operating pressure
5.6 bar ... 8.4 bar
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Explosive ambient temperature
-20°C <= Ta <= +150°C
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 50° swivel angle
7.5 Nm
Spring return torque with 90° swivel angle
15 Nm
Product weight
1200 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Shaft material
High-alloy steel
Housing material
Wrought aluminum alloy

Product condition

Related documents 8030613 Specs