567800 Festo Directional Control Valves

567800 Product Details

• Pneumatic connection 2
  QS-1/4
• Note on materials
  RoHS-compliant
• Operating pressure
  0.5 bar ... 4 bar
• Operating voltage
  24V DC
• Reset method
  Pneumatic spring
• Type code
  MHJ10
• Reverse polarity protection
  for operating voltage
• b-value
  0.36
• Duty cycle
  100%
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Restricted ambient and media temperature
  Depending on the switching frequency (see diagram)
• Electrical connection
  3-wire Cable
• Note on input current
  Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
• Width
  10 mm
• Width dimension
  10.5 mm
• Type of control
  Direct
• Additional functions
  Spark suppression Safety shut-down
• Switching time off at 0.5 bar and 24 V in new condition
  0.6 ms
• Trigger signal range DC
  3 V ... 30 V
• Permissible voltage fluctuations
  +/- 10 %
Storage temperature
-20 °C ... 50 °C
Ambient temperature
-5 °C ... 60 °C
Type of mounting
Optionally: With through-hole
Housing material
PA-reinforced PPS-reinforced
Standard nominal flow rate
160 l/min
Design
Poppet valve without return spring
Information on operation
Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
Sealing principle
Hard
Switching time off at 4 bar and 24 V in new condition
0.5 ms
Switching time on at 0.5 bar and 24 V in new condition
0.8 ms
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Tolerance for ON switching time
+/-15 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Temperature of medium
-5 °C ... 60 °C
Cable length
2.5 m
Seals material
HNBR
Material of cable sheath
PUR
KC characters
KC EMC
Input resistance
34 kOhm
Pneumatic working port
QS-1/4
Certification
RCM compliance mark
Manual override
None
Symbol
00992259
Max. switching frequency
500 Hz
C value
0.66 l/sbar
DC operating voltage range
21.6 V ... 26.4 V
CE marking (see declaration of conformity)
As per EU EMC directive
Permissible solenoid surface temperature
120 °C
Valve function
2/2, closed, monostable
Actuation type
Electrical
Degree of protection
IP65
Mounting position
Any
Flow direction
Non-reversible
Switching time on at 4 bar and 24 V in new condition
1 ms
Tolerance for switching time off
+15 %/-25 %
Information on operating and pilot media
Operation with oil lubrication not possible
Product weight
85 g
Pneumatic connection 1
QS-1/4
Material of screws
Steel

Product condition

Related documents 567800 Specs