565515 Festo Directional Control Valves

565515 Product Details

• b-value
  0.38
• Mounting position
  Any
• Symbol
  00992259
• Valve function
  2/2, closed, monostable
• Actuation type
  Electrical
• Type code
  MHJ10
• Type of control
  Direct
• Additional functions
  Spark suppression Safety shut-down
• Switching time off at 4 bar and 24 V in new condition
  0.4 ms
• DC operating voltage range
  21.6 V ... 26.4 V
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Permissible solenoid surface temperature
  120 °C
• Note on input current
  Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
• Width
  10 mm
• Degree of protection
  IP65
• Information on operation
  Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
• Reverse polarity protection
  for operating voltage
• C value
  0.4 l/sbar
• Switching time on at 6 bar and 24 V in new condition
  0.9 ms
• Tolerance for ON switching time
  +/-15 %
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Information on operating and pilot media
Operation with oil lubrication not possible
Ambient temperature
-5 °C ... 60 °C
Type of mounting
Optionally: With through-hole
Material of screws
Steel
Input resistance
34 kOhm
Pneumatic working port
QS-4
Reset method
Pneumatic spring
Sealing principle
Hard
Flow direction
Non-reversible
Switching time off at 0.5 bar and 24 V in new condition
0.5 ms
Tolerance for switching time off
+15 %/-25 %
Permissible voltage fluctuations
+/- 10 %
Storage temperature
-20 °C ... 50 °C
Note on materials
RoHS-compliant
Housing material
PA-reinforced PPS-reinforced
Operating pressure
0.5 bar ... 6 bar
Standard nominal flow rate
100 l/min
Certification
RCM compliance mark
Width dimension
10.5 mm
Manual override
None
Max. switching frequency
1000 Hz
Switching time on at 4 bar and 24 V in new condition
0.8 ms
Switching time off at 6 bar and 24 V in new condition
0.4 ms
Trigger signal range DC
3 V ... 30 V
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Product weight
85 g
Pneumatic connection 1
QS-4
KC characters
KC EMC
Design
Poppet valve without return spring
Operating voltage
24V DC
Switching time on at 0.5 bar and 24 V in new condition
0.8 ms
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive
Electrical connection
3-wire Cable
Cable length
2.5 m
Pneumatic connection 2
QS-4
Seals material
HNBR
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Temperature of medium
-5 °C ... 60 °C
Material of cable sheath
PUR

Product condition

Related documents 565515 Specs