562172 Festo Directional Control Valves

562172 Product Details

• Input resistance
  34 kOhm
• Standard nominal flow rate
  100 l/min
• Operating voltage
  24V DC
• Sealing principle
  Hard
• Symbol
  00992259
• Switching time off at 4 bar and 24 V in new condition
  0.4 ms
• Switching time off at 0.5 bar and 24 V in new condition
  0.5 ms
• Duty cycle
  100%
• Permissible voltage fluctuations
  +/- 10 %
• Storage temperature
  -20 °C ... 50 °C
• Ambient temperature
  -5 °C ... 60 °C
• Pneumatic connection 1
  QS-1/4
• Housing material
  PA-reinforced PPS-reinforced
• KC characters
  KC EMC
• Operating pressure
  0.5 bar ... 6 bar
• Design
  Poppet valve without return spring
• Certification
  RCM compliance mark
• Mounting position
  Any
• b-value
  0.38
• Switching time on at 6 bar and 24 V in new condition
  0.9 ms
DC operating voltage range
21.6 V ... 26.4 V
Trigger signal range DC
3 V ... 30 V
Information on operating and pilot media
Operation with oil lubrication not possible
Permissible solenoid surface temperature
120 °C
Electrical connection
3-wire Cable
Pneumatic connection 2
QS-1/4
Material of cable sheath
PUR
Note on input current
Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
Width
10 mm
Reset method
Pneumatic spring
Type code
MHJ10
Flow direction
Non-reversible
C value
0.4 l/sbar
Switching time on at 0.5 bar and 24 V in new condition
0.8 ms
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
CE marking (see declaration of conformity)
As per EU EMC directive
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Temperature of medium
-5 °C ... 60 °C
Cable length
0.35 m
Note on materials
RoHS-compliant
Width dimension
10.5 mm
Manual override
None
Reverse polarity protection
for operating voltage
Switching time on at 4 bar and 24 V in new condition
0.8 ms
Tolerance for switching time off
+15 %/-25 %
Material of screws
Steel
Valve function
2/2, closed, monostable
Actuation type
Electrical
Pneumatic working port
QS-1/4
Degree of protection
IP65
Information on operation
Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
Type of control
Direct
Additional functions
Spark suppression Safety shut-down
Max. switching frequency
1000 Hz
Switching time off at 6 bar and 24 V in new condition
0.4 ms
Tolerance for ON switching time
+/-15 %
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Product weight
50 g
Type of mounting
Optionally: With through-hole
Seals material
HNBR

Product condition

Related documents 562172 Specs