553113 Festo Directional Control Valves

Festo 553113 solenoid valve VMPA1-M1H-MU-PI Valve function: 5/2 monostable, Type of actuation: electrical, Valve size: 10 mm, Standard nominal flow rate: 140 - 190 l/min, Operating pressure: -0,9 - 10 bar

Part#:553113

Manufacturer:Festo

Alt. Part#:VMPA1-M1H-MU-PI

Product Lifecycle:Active

Get a quick Quote!

solenoid valve VMPA1-M1H-MU-PI Valve function: 5/2 monostable, Type of actuation: electrical, Valve size: 10 mm, Standard nominal flow rate: 140 - 190 l/min, Operating pressure: -0,9 - 10 bar

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 553113 Festo price in the box on the right side or send a quick quote.

Product Details

Valve function
5/2, monostable
Note on standard nominal flow rate
1->2: 190 l/min 1->4: 140 l/min
Actuation type
Electrical
Design
Poppet valve with return spring
Type code
VMPA1
Symbol
00991190
Signal status display
yes
Permissible voltage fluctuations
+/- 25 %
Storage temperature
-20 °C ... 40 °C
Max. tightening torque for valve mounting
0.25 Nm
Seals material
NBR
Standard nominal flow rate
140 l/min ... 190 l/min
Mounting position
Any
Flow direction
Reversible
Switching time off
14 ms
Max. negative test pulse on 1 signal
200 µs
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Ambient temperature
-5 °C ... 50 °C
Note on materials
RoHS-compliant
Lap
Underlap

Pilot pressure MPa

0.4 MPa ... 0.8 MPa

Degree of protection

IP65 as per IEC 60529

Pilot pressure

4 bar ... 8 bar

On switching time

10 ms

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Type of mounting

With through-hole

Relative air humidity

Max. 90 % at 40 °C

Operating voltage

24V DC

Certification

c UL us - Recognized (OL)

Manual override

Detenting Non-detenting

Standard nominal flow rate with QS-6

140 l/min ... 190 l/min

Max. positive test pulse with 0 signal

400 µs

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Temperature of medium

-5 °C ... 50 °C

Housing material

PPA-reinforced

Operating pressure

-0.9 bar ... 10 bar

Valve size

10 mm

Reset method

Mechanical spring

Sealing principle

Soft

Type of control

Pilot-controlled

Suitability for vacuum

yes

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Certificate issuing authority

UL MH19482

Corrosion resistance class (CRC)

3 - High corrosion stress

Product weight

35 g

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Relevant products

This item can ship within 5 days!

GV2ME14

$86.09

Verified stock: 10

Schneider Electric GV2ME14 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and operates via a push-button. Protection settings include a fixed short-circuit pickup current of 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 4 kW and 3 kW at 400/415Vac, 5.5 kW and 4 kW at 500Vac, and 7.5 kW and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 440Vac; AC-3; In/2 with load. Connection is facilitated through screw-clamp terminals, and it is designed for use with a rated voltage (AC) - phase-to-phase of 690 V. All three poles are protected, with a minimum current of 6 A and a maximum of 10 A. The trip unit type is thermal-magnetic, suitable for utilisation category A AC-3.

Schneider Electric

This item can ship within 24h!

LRD06

$43.20

Verified stock: 20

Schneider Electric LRD06, part of the LRD sub-range, is a differential thermal overload relay designed for direct connection to a contactor and features screw-clamp connections for both upstream and control circuit wiring. This 3-pole device offers protection functions classified under Class 10A, with a rated current range of 1-1.6 A. It includes protection settings for thermal overload within the same range. The LRD06 is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. It supports a rated voltage (AC) for phase-to-phase connections up to 690 V at frequencies from 0 to 400Hz, with a minimum operating current of 1 A and a maximum of 1.6 A.

Schneider Electric

This item can ship within 24h!

S1

$3.89

Verified stock: 62

Switch Contact Blocks / Switch Kits 22mm Switch Contact N/O Silver

Altech Corp.

This item can ship within 5 days!

ATS01N222QN

$372.81

Verified stock: 5

Schneider Electric ATS01N222QN is a soft starter from the Altistart 01 series designed for asynchronous motors. It features 2-controlled phases, a built-in bypass contact, and a built-in control power supply. This model operates on a supply voltage of 342-457Vac (380Vac / 400Vac / 415Vac / 440Vac nominal; 50/60Hz), and has dimensions of H154mm x W45mm x D130.7mm. It offers screw connections for installation, an IP20 degree of protection, and a rated current of 22A nominal. The ATS01N222QN is suitable for DIN rail mounting and is compatible with a 3-phase (3P) network. It requires a control voltage of 24Vac or 24Vdc. The ambient air temperature for operation is rated at +14...+104°F / -10...+40 °C without derating and up to +104...+122°F / +40...+50 °C with a current derating of 2% per °C. For storage, the ambient air temperature range is -13...158°F / -25...70 °C. The rated active power is 11kW for 3-phase operations and 7.5kW for 3-phase, with power dissipation/losses at full load and at the end of starting being 4.5 W in a transient state and 124.5 W.

Schneider Electric

This item can ship within 5 days!

ATS01N232QN

$498.68

Verified stock: 13

Schneider Electric ATS01N232QN is a soft starter from the Altistart 01 series designed for asynchronous motors. It features 2-controlled phases, a built-in bypass contact, and a built-in control power supply. This part operates on a supply voltage of 342-457Vac (380Vac / 400Vac / 415Vac / 440Vac nominal; 50/60Hz), with dimensions of H154mm x W45mm x D130.7mm, and utilizes screw connections for installation. It offers an IP20 degree of protection and is rated for a nominal current of 32A. The ATS01N232QN is suitable for DIN rail mounting and is compatible with a 3-phase (3P) network. It requires a control voltage of 24Vac or 24Vdc and can operate within an ambient air temperature range of +14...+104°F / -10...+40 °C without derating (with a current derating of 2% per °C from +104...+122°F / +40...+50 °C). The storage temperature range is -13...158°F / -25...70 °C. This soft starter is rated for an active power of 15kW (3-phase) and has power dissipation/losses of 4.5 W in a transient state and 324.5 W at full load and at the end of starting.

Schneider Electric

This item can ship within 24h!

GV2ME08

$70.80

Verified stock: 4

Schneider Electric GV2ME08 is a Thermal-Magnetic Motor Protection Circuit Breaker (MPCB) and Manual Motor Starter designed for motor protection. It is part of the GV2ME sub-range and features 3 poles with protection functions including short-circuit and thermal protection (overload). The rated current ranges from 2.5 to 4 A, with a rated insulation voltage (Ui) of 690 V. This device is designed for DIN rail mounting and has a net width of 45 mm. The operating mode is via a push-button, with protection settings for short-circuit pickup current fixed at 51A. The rated impulse voltage (Uimp) is 6 kV, and it offers rated active power (kW) of 1.5 kW and 1.1 kW at 400/415Vac, 2.2 kW and 1.5 kW at 500Vac, and 3 kW and 2.2 kW at 690Vac. The trip current rating is 4 AT, with a frame current rating of 32 AF. It boasts mechanical durability of 100,000 operations at no load and electrical durability of 100,000 operations with load at 440Vac; AC-3; In/2. The type of terminals used are screw-clamp, with a rated voltage (AC) - phase-to-phase of 690 V. All three poles are protected, with a minimum current of 2.5 A and a maximum current of 4 A. The trip unit type is thermal-magnetic, and it falls under the utilisation category A AC-3.

Schneider Electric

This item can ship within 5 days!