552560 Festo Valve Manifold Accessories

552560 Product Details

• Max. number of inputs
  8
• Max. no. of valve positions
  8
• Debounce time at inputs
  3 ms
• AS interface residual ripple
  20 mVss
• Nominal voltage DC
  24 V
• Ambient temperature
  -5 °C ... 50 °C
• Galvanic isolation fieldbus interface
  Optocoupler
• Cover material
  PA-reinforced
• Note on materials
  RoHS-compliant
• Device-specific diagnostics
  Short circuit/overload of inputs
• Reverse polarity protection
  for all electrical operating voltage connections
• Information concerning load voltage
  Via load voltage connection (24 V DC)
• Nominal operating voltage DC AS-Interface
  26.5 V
• Relative air humidity
  0 - 95 % Non-condensing
• Addressing range
  1A ... 31A (0) Setting using AS-Interface addressing device
• Seals material
  CR NBR
• Type code
  CPV10
• Max. no. of solenoid coils
  8
• AS-Interface DC operating voltage range
  26.5 V ... 31.6 V
• Load voltage residual ripple
  4 Vss
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Input characteristics
As per IEC 1131-2, type 02
LED display (bus-specific)
AS-i: AS-Interface mode Fault: AS interface fault
Fieldbus interface
AS-Interface: flat cable plug Load voltage: flat cable plug
Number of slaves per device
2
Load voltage range DC
21.6 V ... 26.4 V
Switching level
Signal 0: <= 5 V Signal 1: >= 11 V
Storage temperature
-20 °C ... 70 °C
Input switching logic
PNP (positive switching)
Product identification
ID code: ID=Ah, ID1=7h, ID2=7h Profile: S-7.A.7
Current consumption with load voltage from AS-Interface and load voltage connection
Inputs: 200 mA Valves: 240 mA (depending on pneumatic valve type)
Degree of protection
IP65 In mounted state
LED display (product-specific)
0 ... 7: switching status of inputs 12/14: switching status of pneumatic valves (on pneumatic valve)
Housing material
Die-cast aluminum

Product condition

Related documents 552560 Specs