547097 Festo Directional Control Valves

547097 Product Details

• Valve function
  5/2, bistable, dominant
• Actuation type
  Electrical
• Design
  Piston gate valve
• Conforms to standard
  ISO 15407-1 VDMA 24563
• Pilot air supply port
  Internal
• Flow rate of pneumatic valve
  750 l/min
• Coil characteristics
  24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Max. tightening torque for valve mounting
  1 Nm
• Type of mounting
  On sub-base
• Pneumatic connection 2
  Sub-base, size 18 mm as per ISO 15407-1
• Pilot interface
  as per ISO 15218
• Note on materials
  RoHS-compliant
• Valve size
  18 mm
• Nominal width
  5 mm
• Exhaust air function
  With flow control option
• Signal status display
  LED
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  550 l/min
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Ambient temperature
-5 °C ... 50 °C
Product weight
174 g
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Material of screws
Steel Galvanized
Pilot pressure MPa
0.3 MPa ... 1 MPa
Pneumatic working port
Sub-base, size 18 mm as per ISO 15407-1 G1/8
Mounting position
Any
Symbol
00991059
Duty cycle
100%
Changeover time
15 ms
Relative air humidity
0 - 90 %
Electrical connection
Form C Without PE conductor
Auxiliary pilot air port 12
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Operating pressure
2 bar ... 10 bar
Operating voltage
24V AC
Degree of protection
IP65 NEMA 4
Type code
VSVA
Manual override
Non-detenting
Type of control
Pilot-controlled
Pilot pressure
3 bar ... 10 bar
Permissible voltage fluctuations
-15 % / +10 %
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Temperature of medium
-5 °C ... 50 °C
Noise level
85 dB(A)
Auxiliary pilot air port 14
Sub-base, size 18 mm as per ISO 15407-1
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Seals material
HNBR NBR
Housing material
Die-cast aluminum
Lap
Overlap
Standard nominal flow rate
550 l/min
Sealing principle
Soft
Flow direction
Non-reversible
Flow rate of pneumatic valve on individual sub-base
550 l/min
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 4
Sub-base, size 18 mm as per ISO 15407-1

Product condition

Related documents 547097 Specs