5340815 Festo Servo Amplifiers
Part#:5340815
Manufacturer:Festo
Alt. Part#:CMMT-AS-C4-3A-PN-S1
Product Lifecycle:Active
Get a quick Quote!
servo drive CMMT-AS-C4-3A-PN-S1 Mounting type: Mounting plate, bolted, Assembly position: (* Free convection, * Vertical), Product weight: 1400 g, Display: LED green/yellow/red, Control elements: Optional: control unit CDSB
About the manufacturer: Festo is one of the manufacturers that offers Servo Amplifiers that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5340815 Festo price in the box on the right side or send a quick quote.
Product Details
- Ethernet interface, protocol TCP/IP
- Encoder interface 2, function Incremental encoder SIN/COS encoder
- Number of high-speed switching outputs 2
- Max. continuous output of the external braking resistor (IEC) 350 W
- Braking resistor nominal power (IEC) 23 W
- Max. current consumption for logic supply with parking brake 1.5 A
- KC characters KC EMC
- Fieldbus interface, connection technology RJ45
- Number of floating switching outputs 1
- Max. current of the floating switching outputs 50 mA
- Pulse energy for braking resistor 230 Ws
- Max. voltage drop from logic supply to brake output 0.8 V
- Time resolution of high-speed switching outputs 1 µs
- Controller operating mode Cascade control Autotuning
- Safety integrity level (SIL) Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
- Braking resistor, integrated 100 Ohm
- Hardware fault tolerance 1
- Max. peak current duration 2 s
- Input voltage range AC 100 V ... 230 V
- Nominal current load supply 5.6 A
- Fieldbus interface, transmission rate 100 Mbit/s
- Information on max. installation height 1% power reduction/100 m above 1000 m.
- Mains types TT IT
- Overvoltage category III
- Number of diagnostic outputs 2
- System voltage to EN 61800-5-1 300 V
- Number of safe 2-pin inputs 2
- Based on norm EN 50581 EN 62061
- Mode of operation Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
- Output frequency 0 Hz ... 599 Hz
- Impedance of setpoint input 70 kOhm
- Nominal voltage, logic supply DC 24 V
- SFF safe failure fraction 99 %
- Max. current consumption for logic supply without clamping brake 0.5 A
- Permissible voltage fluctuations -20 % / +15 %
- Note on ambient temperature Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
- Number of digital logic outputs 24 V DC 6
- Logic input specification Based on IEC 61131-2, type 3
- Encoder interface output, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Type code CMMT-AS
- Ethernet interface, function Parameterization and commissioning
- Encoder interface, function EnDat® 2.1 encoder SIN/COS encoder
- Synchronization interface, function Encoder emulation A/B/Z Encoder input A/B/Z
- Number of inputs for motor temperature sensor 1
- Max. output current of holding brake 1 A
- Number of high-speed logic inputs 2
- Time resolution of high-speed logic inputs 1 µs
- Conforms to standard EN 61800-3 EN ISO 13849-1
- Line filter Integrated
- Display LED green/yellow/red
- Braking resistor, external 67 Ohm ... 100 Ohm
- Characteristics of digital logic outputs Freely configurable in some cases Diagnostic outputs in some cases
- Pulse power of braking resistor 1.6 kVA
- Max. DC link voltage 395 V
- Nominal voltage, load supply DC 320 V
- Nominal operating voltage phases 1-phase
- Peak current per phase, effective 12 A
- Contamination level 2
- Storage temperature -25 °C ... 55 °C
- Certification RCM compliance mark c UL us - Listed (OL)
- Number of analog setpoint inputs 1
- Work range of logic input -3 V ... 30 V
- Encoder interface input, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Switching logic at outputs PNP (positive switching)
- Fieldbus interface, function Bus connection, incoming/forwarding PROFINET slave
- Mounting position Free convection Vertical
- Protection class I
- Fieldbus interface, protocol PROFINET IRT PROFINET RT
- Fieldbus interface, connection type 2x socket
- Max. short circuit protection of mains 100 kA
- Max. installation height 2000 m
- Safety function Safe brake control (SBC) Safe stop 1 (SS1)
- Control elements Optional: CDSB operating unit
- Diagnostic coverage 97 %
- Max. current of digital logic outputs 20 mA
- Nominal operating voltage AC 230 V
- Mains frequency 48 Hz ... 62 Hz
- Surge resistance 6 kV
- Load supply permissible range -20 %/+15 %
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP20
- Number of digital logic inputs 12
- Operating range of analog inputs ± 10 V
- Characteristics of logic input Freely configurable in some cases Not galvanically isolated
- Type of mounting Mounting plate, screwed on
- Active PFC no
- Performance Level (PL) Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
- Output voltage range AC 3x (0 – input) V
- Max. length of motor cable without ext. mains filter 25 m
- Controller nominal power 700 VA
- Nominal current per phase, effective 4 A
- Peak power 2000 VA
- Permissible range of logic voltage ± 20 %
- Relative air humidity 5 - 90 % Non-condensing
- Ambient temperature 0 °C ... 50 °C
- UL-ambient temperature 0 °C ... 40 °C
- Process interfacing AC1: Adjustable-Speed Drives AC4: Synchronous Servo Application
- Input switching logic PNP (positive switching)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Peak current, load supply 16.8 A
- Max. current consumption for logic supply with clamping brake and I/O 2.3 A
- Certificate issuing authority German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
- Product weight 1400 g
- Communication profile PROFIdrive PROFIenergy
- Work range of setpoint input ± 10 V
- Characteristics of setpoint inputs Differential inputs Configurable for current/force
- Fieldbus coupling PROFINET
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5340815 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨