4080493 Festo Electrical Peripheral Devices

4080493 Product Details

• Note on ambient temperature
  -5 - 60 °C for vertical installation
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Electrical connection input, connection type
  4x terminal strip
• Electrical connection input 2, function
  Functional ground
• Electrical connection, input 2, number of pins/wires
  4
• Electrical connection for input, conductor cross section
  0.2 mm² ... 1.5 mm²
• Fuse protection (short circuit)
  Internal electronic fuse per module
• Max. residual current of inputs per module
  1.4 A
• Certificate issuing authority
  UL E239998
• Max. address capacity inputs
  8 byte
• Product weight
  96 g
• Max. cable length
  30 m Shielded
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Signal range
  -10 - 10 V 4 - 20 mA
• Diagnostics via LED
  Faults per channel Faults per module
• Electrical connection for input 2, information on conductor cross section
  0.2 - 2.5 mm² for flexible conductors without cable end sleeves
• Electrical connection, input, number of pins/wires
  4
• Measured variable
  Voltage Current
• Basic error limit at 25°C
  ±0.2 %
• Power failure buffering
  10 ms
Corrosion resistance class (CRC)
0 - No corrosion stress
Data format
15 bit + sign Linear scaling
Housing material
PA
Electrical connection input, function
Analog input
Permissible voltage fluctuations for electronics/sensors
± 25 %
Module parameters
Parameterization error diagnostics Limit monitoring hysteresis
Electrical connection input 2, connection type
Terminal strip
Electrical connection for input 2, connection pattern
00995842
Operating error limit related to the ambient temperature range
±0.3 %
Electrical isolation between channel and internal bus
yes
CE marking (see declaration of conformity)
As per EU EMC directive
Relative air humidity
95 % Non-condensing
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection for input, information on conductor cross section
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Diagnostics via bus
Wire break Lower limit value not complied with
KC characters
KC EMC
Electrical input 2 connection, connection technology
Spring-loaded terminal
Electrical connection for input 2, conductor cross section
0.2 mm² ... 1.5 mm²
Repetition accuracy
±0.1 % at 25 °C
Electrical isolation between channels
no
Storage temperature
-20 °C ... 70 °C
Ambient temperature
-5 °C ... 50 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Dimensions W x L x H
18.9 mm x 76.6 mm x 124.3 mm
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 70 mA
Electrical input connection, connection technology
Spring-loaded terminal
Channel parameters
Signal range per channel Lower/upper limit
Nominal operating voltage DC for electronics/sensors
24 V
Width dimension
18.9 mm
Type code
CPX-E
No. of inputs
4
Degree of protection
IP20
Type of mounting
With H-rail

Product condition

Related documents 4080493 Specs