3215473 Festo Servo Amplifiers

3215473 Product Details

• Line filter
  Integrated
• Max. peak current duration
  5 s
• Controller nominal power
  9000 VA
• Peak power
  18000 VA
• Contamination level
  2
• Relative air humidity
  0 - 90 %
• Output voltage range AC
  3x 0 - 360 V
• Max. current of digital logic outputs
  100 mA
• Nominal output current
  15 A
• Mains frequency
  50 Hz ... 60 Hz
• Peak current per phase, effective
  30 A
• Parameterization interface
  Parameterization and commissioning Ethernet
• Permissible voltage fluctuations
  +/- 10 %
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Number of analog setpoint inputs
  2
• Number of digital logic inputs
  10
• Resolution of monitor outputs
  9 bit
• Characteristics of setpoint inputs
  Differential inputs Configurable for current
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Type code
  CMMP-AS
Output frequency
0 Hz ... 1000 Hz
Impedance of setpoint input
20 kOhm
Max. DC link voltage
560 V
Nominal current per phase, effective
15 A
Nominal voltage, logic supply DC
24 V
Permissible range of logic voltage
± 20 %
Ambient temperature
0 °C ... 40 °C
Product weight
3450 g
Communication profile
DS301/DSP402 FHPP
Work range of setpoint input
± 10 V
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Max. fieldbus transmission rate
1 Mbit/s
Pulse power of braking resistor
8.5 kVA
Nominal current
13 A
Number of digital logic outputs 24 V DC
5
Working range of monitor outputs
± 10 V
Characteristics of logic input
Galvanically isolated Freely configurable
Fieldbus coupling
CANopen Profibus DP
Display
Seven-segment display
Braking resistor
68 Ohm
Characteristics of digital logic outputs
Galvanically isolated Freely configurable in some cases
Nominal operating voltage AC
400 V
Nominal operating voltage phases
3-phase
Max. current consumption for logic supply without clamping brake
1 A
Degree of protection
IP10 IP20
Certification
RCM compliance mark c UL us - Listed (OL)
Process interfacing
I/O coupling For 256 positioning blocks
Encoder interface output, characteristics
Resolution 16384 ppr
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Type of mounting
On sub-base Screwed tightly
Storage temperature
-25 °C ... 70 °C
Number of analog monitor outputs
2
Work range of logic input
8 V ... 30 V
Characteristics of monitor outputs
Short circuit-proof
Bus connection
Plug Sub-D
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.

Product condition

Related documents 3215473 Specs