1622901 Festo Servo Amplifiers

1622901 Product Details

• Type code
  CMMP-AS
• Output voltage range AC
  3x 0 - 270 V
• Diagnostic coverage
  97 %
• Impedance of setpoint input
  20 kOhm
• Nominal operating voltage AC
  230 V
• Nominal output current
  2.5 A
• Parameterization interface
  Parameterization and commissioning Ethernet
• Permissible voltage fluctuations
  +/- 10 %
• Relative air humidity
  0 - 90 %
• Proof test interval
  20 y
• Number of digital logic outputs 24 V DC
  5
• Work range of logic input
  8 V ... 30 V
• Resolution of monitor outputs
  9 bit
• Encoder interface input, characteristics
  3-phase encoder signals SINCOS
• Type of mounting
  On sub-base Screwed tightly
• Safety function
  Safe torque off (STO) Safe stop 1 (SS1)
• Performance Level (PL)
  Safe torque off (STO)/category 4, performance level e
• Characteristics of digital logic outputs
  Galvanically isolated Freely configurable in some cases
• Max. current of digital logic outputs
  100 mA
• Max. DC link voltage
  320 V
Nominal current
2 A ... 3 A
SFF safe failure fraction
99.17 %
Peak power
1000 VA
Certificate issuing authority
01/205/5162.02/19 German Technical Control Board (TÜV) Rheinland
Degree of protection
IP10 IP20
Product weight
2100 g
Number of digital logic inputs
10
Encoder interface output, characteristics
Resolution 16384 ppr
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Line filter
Integrated
Safety integrity level (SIL)
Safe torque off (STO)/SIL 3/SILCL 3
Braking resistor
60 Ohm
Pulse power of braking resistor
2.8 kVA
Nominal voltage, logic supply DC
24 V
Mains frequency
50 Hz ... 60 Hz
Peak current per phase, effective
5 A
Max. current consumption for logic supply without clamping brake
0.55 A
Contamination level
2
Ambient temperature
0 °C ... 40 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Process interfacing
I/O coupling For 256 positioning blocks
Characteristics of logic input
Galvanically isolated Freely configurable
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Output frequency
0 Hz ... 1000 Hz
Hardware fault tolerance
1
Max. peak current duration
5 s
Controller nominal power
500 VA
Nominal current per phase, effective
2.5 A
Nominal operating voltage phases
1-phase
Permissible range of logic voltage
± 20 %
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-25 °C ... 70 °C
Number of analog monitor outputs
2
Number of analog setpoint inputs
2
Work range of setpoint input
± 10 V
Characteristics of monitor outputs
Short circuit-proof
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Fieldbus coupling
CANopen Modbus®/TCP
Active PFC
yes
Display
Seven-segment display
Communication profile
DS301/DSP402
Working range of monitor outputs
± 10 V
Characteristics of setpoint inputs
Differential inputs Configurable for current
Bus connection
9-pin Socket
Max. fieldbus transmission rate
1 Mbit/s

Product condition

Related documents 1622901 Specs