119474 Euchner Electronic Components

Product Details

• Assured release distance Sar
  max.72 mm
• Switching hysteresis
  min.1 mm
• Category
  4
• Assured operating distance Sao
  min.15 mm
• Operating distance
  30 mm
• Mission time
  20
• PFHD
  4.1 x 10⁻⁹
• Performance Level
  PL e
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Additional feature
  Rubber support included
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Rated conditional short-circuit current
  100 A
• Utilization category acc. to EN 60947-5-2
  24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Test-pulse interval
  min.140 ms
• Off-state current Ir
  max.0,25 mA
• Test pulses
  max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Turn-on time
  max.400 ms
• Output voltage
  0,8 x UB ... UB V DC
• Degree of contamination (external, according to EN 60947-1)
  3
Risk time according to EN 60947-5-3
max.260 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Type of output
Semiconductor output, p-switching, short circuit-proof
Switching current
max.50 mA
Safety class
III
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Rated insulation voltage Ui
300 V
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Current consumption
max.35 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV
Connection
M8 plug connector, 8-pin
Switching frequency
max.1 Hz
Ready delay
10 s
Tightening torque
max.0,8 Nm
Installation orientation
Any
Mounting method
Surface mounting on metal
Material
NBR 80 ±5 Shore
Mounting distance
min.80 mm
Ambient temperature
-25 ... 65 °C
Degree of protection
IP67/IP69K
Housing material
Plastic, PBT
Weight
0,04 kg
Shock and vibration resistance
In acc. with EN 60947-5-3