PS100-1N-BENC Banner Sensor Accessories

Turck PS100-1N-BENC is a sensor designed for pressure measurement with programmable relative pressure sensor capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units including bar, psi, kPa, MPa, and miscellaneous options. The sensor operates in ambient air temperatures ranging from -40°C to +80°C and has a cylindrical body with a diameter of 34mm. It is pre-equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. As part of the PS300 series, it offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's maximum switching frequency is 180Hz, and it is constructed from 1.4305 (303) stainless steel with ceramics Al2O3 pressure transducer and stainless steel wetted parts. It can measure pressure from 0 to +100bar (0 to +1450psig) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, and it can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity, with a response time ranging from 50 to 600ms. It features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), with set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. The control circuit's rated current is 200mA, with a current consumption of 50mA, and time delays for ON-delay and OFF-delay settings range from 0-50.