​
Nikki Gonzales
Nick Goetz
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

DEK100-A2R1-A Banner Electronic Components

Banner DEK100-A2R1-A Banner Engineering DEK100-A2R1-A is a remote I/O controller designed for surface mounting with an ambient air temperature for operation ranging from -20 to +60 °C. It features 2 analog outputs (0-10Vdc; 32-bit) and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), alongside 4 digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This part, belonging to the DEK wireless kits sub-range, is equipped with a Modbus controller function and operates on a 900 MHz transmission frequency within the 900MHz ISM band. It offers a degree of protection rated at IP20 NEMA 4X and is housed in a 4 holes (gld. and vent) PBT enclosure with a 5W solar panel and battery backup designed for AT&T. The supply voltage required is 12-30Vdc (12Vdc-24Vdc nom.), and it utilizes an RS-485 Modbus RTU communication protocol.
Banner

Part#:DEK100-A2R1-A

Manufacturer:Banner

Product Lifecycle:Active

Get a quick Quote!

Banner Engineering DEK100-A2R1-A is a remote I/O controller designed for surface mounting with an ambient air temperature for operation ranging from -20 to +60 °C. It features 2 analog outputs (0-10Vdc; 32-bit) and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), alongside 4 digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This part, belonging to the DEK wireless kits sub-range, is equipped with a Modbus controller function and operates on a 900 MHz transmission frequency within the 900MHz ISM band. It offers a degree of protection rated at IP20 NEMA 4X and is housed in a 4 holes (gld. and vent) PBT enclosure with a 5W solar panel and battery backup designed for AT&T. The supply voltage required is 12-30Vdc (12Vdc-24Vdc nom.), and it utilizes an RS-485 Modbus RTU communication protocol.

About the manufacturer: Banner is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the DEK100-A2R1-A Banner price in the box on the right side or send a quick quote.

Product Details

  • Battery Type/Size
    LiFePO
  • Tree Topology
    No
  • Voltage
    12-30 V dc
  • Min Op. Temperature (°C)
    -20
  • Point-to-Point Topology
    Yes
  • Relative Humidity
    95%
  • Star Topology
    Yes
  • Point-to-Multipoint Topology
    Yes
  • Cord Length (m)
    3
  • Max Op. Temperature (°C)
    60
  • Outside Housing Dimensions (cm)
    21.15 x 16.15 x 10.00
  • Wireless
    Yes
  • RS-485
    Yes
  • Wireless Radio Frequency
    900 MHz
  • Power Supply
    Solar Panel
  • RS-232
    No
  • Modbus/TCP
    No
  • Modbus RTU
    Yes
  • EtherNet/IP
    No
  • Pressure Sensor Input
    Yes
  • Application: Tank Level
    Yes
  • Application: Vibration Sensor Input
    Yes
  • Power
    Battery & DC Supply
  • Ships With Battery
    Yes
  • Feature: Hazardous Area
    No
  • Application: Temperature Input
    Yes
  • Application: Relative Humidity Input
    Yes
  • Primary Housing Material
    PBT

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Related documents DEK100-A2R1-A Specs

DEK100-A2R1-A DEK100-A.pdf
DEK100-A2R1-A DXM100-A1 and A2 Wireless Controller Datasheet.pdf
DEK100-A2R1-A DEK100-A.stp

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Banner

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Banner Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Banner Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Banner, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

DEK100-A2R1-V Part Image. Manufactured by Banner.

DEK100-A2R1-V

Verified stock: 0

Banner Engineering DEK100-A2R1-V is a remote I/O controller designed for surface mounting. It operates within an ambient air temperature range of -20 to +60°C and features two analog outputs (0-10Vdc; 32-bit) and four digital outputs (12Vdc-30Vdc; NMOS; 1A), ensuring versatile connectivity options. This controller is equipped with four digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as four analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor), providing flexibility in input signal types. It offers a degree of protection rated at IP20 NEMA 4X and utilizes a 900 MHz transmission frequency for communication. As a Modbus controller, it supports RS-485 Modbus RTU protocol over the 900MHz ISM band. The DEK100-A2R1-V is part of the DEK wireless kits sub-range and features a design that includes four holes (gld. and vent) in a PBT enclosure, a 5W solar panel, and battery backup for Verizon, with a supply voltage requirement of 12-30Vdc (12Vdc-24Vdc nom.).

Banner

DEK100-A1-V Part Image. Manufactured by Banner.

DEK100-A1-V

Verified stock: 0

Banner Engineering DEK100-A1-V is a remote I/O controller designed for surface mounting. It operates within an ambient air temperature range of -20 to +60°C and features two analog outputs (0-10Vdc; 32-bit), ensuring precise control. The device is protected by an IP20 NEMA 4X rated enclosure, suitable for various industrial environments. It includes four digital outputs (12Vdc-30Vdc; NMOS; 1A) and four digital inputs (12-30Vdc; Sink/Source/Counter), which can also function as four analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor), offering flexibility in application. As a Modbus controller, it supports RS-485 Modbus RTU communication protocol. The DEK100-A1-V is part of the DEK wireless kits sub-range and features a design that includes four holes (gld. and vent) in a PBT enclosure, a 5W solar panel, and battery backup for Verizon, with a supply voltage requirement of 12-30Vdc (12Vdc-24Vdc nom.).

Banner

DEK100-A1-A Part Image. Manufactured by Banner.

DEK100-A1-A

Verified stock: 0

Banner Engineering DEK100-A1-A is a remote I/O controller designed for surface mounting with an ambient air temperature for operation ranging from -20 to +60 °C. It features 2 analog outputs (0-10Vdc; 32-bit) and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), alongside 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This part, belonging to the DEK wireless kits sub-range, is equipped with a Modbus controller function and supports RS-485 Modbus RTU communication protocol. It has a degree of protection rated at IP20 NEMA 4X and is designed with a 4 holes (gld. and vent) PBT enclosure, a 5W solar panel, and battery backup for AT&T. The supply voltage required for operation is 12-30Vdc (12Vdc-24Vdc nom.).

Banner

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo