X20SO2530 B&R Electronic Components
Part#:X20SO2530
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
X20 safe digital output module, 2 relays with 1 normally open contact each, 230 VAC / 6 A, 24 VDC / 6 A
Check out the X20SO2530 B&R price in the box on the right side or send a quick quote.
Product Details
- Temperature Operation Vertical mounting orientation 0 to 50°C
- Temperature Operation Horizontal mounting orientation 0 to 60°C
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wired Negligible
- Safe relay channels EN ISO 13849-1:2015 PL PL c if the relay channel is used individually,; PL e if 2 relay channels are connected in series
- Safe relay channels EN ISO 13849-1:2015 Category Cat. 1 if the relay channel is used individually, ; Cat. 4 if 2 relay channels are connected in series
- Safe relay channels IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SIL CL SIL 1 if the relay channel is used individually,; SIL 3 if 2 relay channels are connected in series
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wireless <1*10-14 * Number of openSAFETY packets per hour
- Relative humidity Transport 5 to 95%, non-condensing
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd Per channel <1*10-10
- Certifications Relays EN 50205 Yes
- Certifications Relays EN 50155 Yes
- Relative humidity Storage 5 to 95%, non-condensing
- Temperature Derating See section "Derating".
- Relative humidity Operation 5 to 95%, non-condensing
- Temperature Storage -40 to 85°C
- Temperature Transport -40 to 85°C
- Mounting orientation Vertical Yes
- Certifications EAC Yes
- Max. switching capacity UL 508 B300 / R300
- Mounting orientation Horizontal Yes
- Max. switching capacity AC15 230 VAC / 3 A
- Max. switching capacity AC1 230 VAC / 6 A
- Max. switching capacity DC13 24 VDC / 5 A / 0.1 Hz
- Certifications ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFD <2*10-5
- Switching delay 1 → 0 <50 ms
- Switching delay 0 → 1 <50 ms
- Certifications DNV In preparation
- Max. switching capacity DC1 24 VDC / 6 A
- IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 Proof test interval (PT) 20 years
- EN ISO 13849-1:2015 MTTFD 2500 years
- EN ISO 13849-1:2015 Mission time Max. 20 years
- Certifications HazLoc cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
- Certifications UL cULus E115267; Industrial control equipment
- Certifications UKCA Yes
- Certifications Functional safety cULus FSPC E361559; Energy and industrial systems; Certified for functional safety; ANSI UL 1998:2013
- Electrical isolation Channel - Channel Yes
- Certifications CE Yes
- Power consumption Bus 0.26 W
- Electrical isolation Channel - Bus Yes
- Blackout mode Standalone mode No
- Power consumption Internal I/O 1.15 W
- Blackout mode Function Module functionality
- Blackout mode Scope Module
- Diagnostics Outputs Yes, using LED status indicator and software
- System requirements mapp Technology Package mapp Safety 5.7.0 or later
- Diagnostics Module run/error Yes, using LED status indicator and software
- System requirements Safety Release 1.2 or later
- System requirements SafeDESIGNER 2.70 or later
- System requirements Automation Runtime 3.00 or later
- System requirements Automation Studio 3.0.81.15 or later
- Pitch 25+0.2 mm
- Max. inrush current 30 A for 20 ms
- Short-circuit proof Yes, 1000 A (with specified short-circuit/overload protection)
- Note Order 1x safety-keyed terminal block separately.; Order 1x safety-keyed bus module separately.
- Installation elevation above sea level 0 to 2000 m, no limitation
- Overvoltage category per EN 60664-1 II
- Coil voltage 24 VDC -15% / +20%
- Degree of protection per EN 60529 IP20
- Contact service life See "Contact service life".
- Short-circuit/Overload protection External 6 A gL/gG fuse (melting fuse), LS automat C characteristic 1.6 A
- Switching voltage range 5 to 24 VDC, 5 to 230 VAC
- Insulation voltage between channel and bus Safe disconnection of 300 VAC per EN 50178
- Insulation voltage between channel and channel Tested at 1350 VAC
- Contact resistance (without terminal block) 20 mΩ
- Max. switching frequency See section "Inrush current behavior for output channels".
- Nominal output current 5 mA to 6 A
- Diagnostic status Contact position determined by positively driven contacts
- Variant Relay / Normally open contact, internal high-side and low-side control
- I/O module 2 relays with 1 normally open contact each, 230 VAC / 6 A, 24 VDC / 6 A
- Status indicators I/O function per channel, operating state, module status
- Additional power dissipation caused by actuators (resistive) [W] 1.44
- Max. I/O cycle time 1 ms
- Quantity 2
- Integrated protection Reverse polarity protection
- Nominal voltage 24 VDC
- Voltage range 24 VDC -15% / +20%
- B&R ID code 0xD205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
