X20SM1436 B&R Electronic Components

X20SM1436 Product Details

• Temperature Operation Vertical mounting orientation
  Not permitted
• Temperature Operation Horizontal mounting orientation
  0 to 50°C
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Transport
  5 to 95%, non-condensing
• Power consumption External I/O 48 VDC
  3.15 W
• Power consumption External I/O 24 VDC
  2.45 W
• Temperature Derating
  See section "Derating".
• Temperature Transport
  -25 to 70°C
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Storage
  -25 to 70°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Mounting orientation Horizontal
  Yes
• Switching threshold Low
  <5 VDC
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Input filter Hardware
  <5 µs
• Input filter Software
  -
• Switching threshold High
  >15 VDC
• Certifications KC
  Yes
• Certifications EAC
  Yes
• Module power supply Fuse
  Required line fuse: Max. 10 A, slow-blow
Certifications UL
cURus E225616; Power conversion equipment
Module power supply Supply
External
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Power consumption Internal I/O
-
Certifications UKCA
Yes
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Power consumption Bus
0.01 W
Diagnostics I/O power supply
Yes, using software
Certifications CE
Yes
Degree of protection per EN 60529
IP20
Pitch
25+0.2 mm
Diagnostics Output
Yes, using LED status indicator and software
Diagnostics Module run/error
Yes, using LED status indicator and software
Evaluation
4x
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM31 separately.
Electrical isolation
Channel isolated from bus; Channel not isolated from I/O power supply
Input frequency
Max. 50 kHz
Input circuit
Sink
Counter size
16-bit
Step resolution
Max. 256 microsteps per step
Input resistance
Typ. 18.2 kΩ
Connection type
1-wire connections
Output protection
No reverse polarity protection of the supply voltage
Encoder inputs
24 V, asymmetrical
Additional functions
1x ABR incremental encoder
DC bus capacitance
100 µF
Status indicators
I/O function per channel, operating state, module status
Maximum current
3.5 A for 2 s (after a recovery time of at least 10 s at maximum 3 A)
Quantity
1
Nominal voltage
24 to 39 VDC ±25%
Nominal current
3 A
Type
2-phase bipolar stepper motor (full bridge)
Controller frequency
38.4 kHz
I/O module
1 full bridge for controlling stepper motors
B&R ID code
0x2682

Product condition

Related documents X20SM1436 Specs