1SBL347501R1200 ABB Control Industrial Automation Components

ABB 1SBL347501R1200 is a magnetic contactor designed with screw-clamp connections. It is rated for a current of 70A at 690Vac for AC-1 design, 60A at 690Vac with Normally Open (NO) auxiliary contacts, and 50A at 690Vac for resistance operations. The supply voltage is specified for AC-1 operations. It supports a control voltage for AC-15 operations across various AC voltages, including 24-127Vac, 220-240Vac, 400-440Vac, 500Vac, and 690Vac, and for DC-13 operations at 24Vdc, 48Vdc, 72Vdc, 110Vdc, 125Vdc, 220Vdc, 250Vdc, 400Vdc, and 500Vdc. The contactor is equipped with 4 poles (4P) and offers a combination of 2NO+2NC contacts. It operates within an ambient air temperature range for both operation and storage specified for AC-15. The rated impulse voltage (Uimp) is 6 kV, and the rated insulation voltage (Ui) is for DC-13 operations. The net dimensions are provided with a height of 110 mm, width for DC-13 operations, and a depth for DC-13 operations. It is designed for mounting on a plate and falls under the sub-range name 88861436240. The mechanical resistance is specified for AF40 contactors, with a short circuit breaking rating of 48Vdc-130Vdc (110Vdc). The rated operating voltage (Ue) is 110 mm, with a primary current of 6 kV. The frequency ratings are (IEC/VDE) 690 V and (UL/CSA) 600 V. It has a memory capacity for 48Vac-130Vac (60Vac / 100Vac / 110Vac / 120Vac) at 50Hz/60Hz. The power consumption is detailed for 0 NO contacts, with processing times of 40VA inrush and 4VA holding for the coil, and power inrush of 40W with 2W holding for the coil. The short circuit withstand current (Icw) is for DC operations, and the contactor is capable of (at no load) 3600 Cycles/hour and (AC-1) 600 Cycles/hour.