​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1SBH137001R1462 ABB Control Contactors

ABB Control 1SBH137001R1462 ABB 1SBH137001R1462 is a magnetic contactor relay designed with screw-clamp connections. It supports a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac and 690Vac under AC-15 conditions. This contactor features normally open (NO) auxiliary contacts rated for AC-15 usage, with a supply voltage accommodating 0 NO contacts. It has a rated impulse voltage (Uimp) ranging from 250Vdc to 500Vdc and offers protection functions with a rated insulation voltage (Ui) of 6 kV. The net depth of the unit is 45 mm, and it utilizes a control voltage (AC) with 2 x 4-poles (2x4P / 8P, 6NO+2NC) for mounting. The technology used in the component complies with IEC/VDE 690 V and UL/CSA 600 V standards. Its power consumption spans 250Vac to 500Vac (277Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac) at 50Hz/60Hz. Designed for mounting on DIN rail, the contactor has a rated operating voltage (Ue) of 690 V and demonstrates electrical durability with NF62E 8-pole contactors. It features a resistance of 50VA inrush and 2.2VA holding for the coil, with 50W inrush and 2W holding power. The net width is specified in DC units.
ABB Control

Part#:1SBH137001R1462

Manufacturer:ABB Control

Product Lifecycle:Active

Get a quick Quote!

ABB 1SBH137001R1462 is a magnetic contactor relay designed with screw-clamp connections. It supports a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac and 690Vac under AC-15 conditions. This contactor features normally open (NO) auxiliary contacts rated for AC-15 usage, with a supply voltage accommodating 0 NO contacts. It has a rated impulse voltage (Uimp) ranging from 250Vdc to 500Vdc and offers protection functions with a rated insulation voltage (Ui) of 6 kV. The net depth of the unit is 45 mm, and it utilizes a control voltage (AC) with 2 x 4-poles (2x4P / 8P, 6NO+2NC) for mounting. The technology used in the component complies with IEC/VDE 690 V and UL/CSA 600 V standards. Its power consumption spans 250Vac to 500Vac (277Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac) at 50Hz/60Hz. Designed for mounting on DIN rail, the contactor has a rated operating voltage (Ue) of 690 V and demonstrates electrical durability with NF62E 8-pole contactors. It features a resistance of 50VA inrush and 2.2VA holding for the coil, with 50W inrush and 2W holding power. The net width is specified in DC units.

About the manufacturer: ABB Control is one of the manufacturers that offers Contactors that you can order at Quotebeam.com. ABB's Industrial Automation division offers a variety of solutions designed for process and hybrid industries, including industry-specific integrated automation, electrification, and digital solutions, control technologies, software, and advanced services.

Check out the 1SBH137001R1462 ABB Control price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

1SBH137001R1462 Description

ABB 1SBH137001R1462 is a magnetic contactor relay designed with screw-clamp connections. It supports a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac and 690Vac under AC-15 conditions. This contactor features normally open (NO) auxiliary contacts rated for AC-15 usage, with a supply voltage accommodating 0 NO contacts. It has a rated impulse voltage (Uimp) ranging from 250Vdc to 500Vdc and offers protection functions with a rated insulation voltage (Ui) of 6 kV. The net depth of the unit is 45 mm, and it utilizes a control voltage (AC) with 2 x 4-poles (2x4P / 8P, 6NO+2NC) for mounting. The technology used in the component complies with IEC/VDE 690 V and UL/CSA 600 V standards. Its power consumption spans 250Vac to 500Vac (277Vac / 380Vac / 400Vac / 415Vac / 440Vac / 480Vac) at 50Hz/60Hz. Designed for mounting on DIN rail, the contactor has a rated operating voltage (Ue) of 690 V and demonstrates electrical durability with NF62E 8-pole contactors. It features a resistance of 50VA inrush and 2.2VA holding for the coil, with 50W inrush and 2W holding power. The net width is specified in DC units.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of ABB Control

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

ABB Control Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many ABB Control Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from ABB Control, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

1SBH137001R4171 Part Image. Manufactured by ABB Control.

1SBH137001R4171

Verified stock: 0

ABB 1SBH137001R4171 is a magnetic contactor designed with screw-clamp connections. It supports a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac under AC-15 conditions. This contactor features normally open (NO) auxiliary contacts rated for 2A at 690Vac, also under AC-15 conditions. It is equipped with a supply voltage of 0 NO contacts and offers protection functions with a rated insulation voltage (Ui) of 6 kV. The net depth of the contactor is 45 mm, and it utilizes a control voltage (AC) of 2 x 4-poles (2x4P / 8P) with a mounting mode of 7NO+1NC. The technology used in this component complies with IEC/VDE 690 V and UL/CSA 600 V standards. It has a power consumption range of 24Vac-60Vac (36Vac / 48Vac) at 50Hz/60Hz, and it is designed for mounting on DIN rail. The rated operating voltage (Ue) is 690 V, and it has an electrical durability for NF71E 8-pole contactors. The resistance specifications include 50VA inrush and 2.2VA holding for the coil.

ABB Control

1SBH137001R4140 Part Image. Manufactured by ABB Control.

1SBH137001R4140

Verified stock: 0

ABB 1SBH137001R4140 is a magnetic contactor designed for screw-clamp connections, with a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac under AC-15 conditions. It features normally open (NO) auxiliary contacts rated for 2A at 690Vac. The contactor is equipped with a 4-pole (4P) design, supporting 4NO mounting mode, and utilizes technology compliant with IEC/VDE at 690V and UL/CSA at 600V standards. The supply voltage for the AC is indicated by 0 NO contacts, with a protection function depth of 86 mm and a rated insulation voltage (Ui) of 6 kV. Its net depth is 45 mm, and it operates on a control voltage (AC) with a power consumption range of 24Vac-60Vac (36Vac / 48Vac) at 50Hz/60Hz. The contactor is designed for mounting on DIN rail, with a rated operating voltage (Ue) of 690 V and electrical durability specified for NF40E contactors. It has a resistance of 50VA inrush and 2.2VA holding for the coil.

ABB Control

1SBH137001R1353 Part Image. Manufactured by ABB Control.

1SBH137001R1353

Verified stock: 0

ABB 1SBH137001R1353 is a magnetic contactor designed with screw-clamp connections. It operates at a rated current of 6A for 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500-690Vac under AC-15 conditions. This contactor features normally open (NO) auxiliary contacts rated for AC-15 use, with a supply voltage of 0 NO contacts. It has a rated impulse voltage (Uimp) of 100-250Vdc, specifically 110Vdc and 220Vdc, and a rated insulation voltage (Ui) of 6 kV. The net depth of the contactor is 45 mm, and it supports a control voltage (AC) for 2 x 4-poles (2x4P / 8P) with a mounting mode of 5NO+3NC. The technology used in the component complies with IEC/VDE 690 V and UL/CSA 600 V standards. Its power consumption ranges from 100Vac to 250Vac across various voltages (110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac) at 50Hz/60Hz. The contactor is designed for mounting on DIN rail, with a UPC code of 80432555629 and a rated operating voltage (Ue) of 690 V. It has an electrical durability for NF53E 8-pole contactors and a resistance of 50VA inrush and 2.2VA holding for the coil, with 50W inrush and 2W holding power for the coil under DC conditions.

ABB Control

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo