3273790 Phoenix Contact Terminal Blocks
Part#:3273790
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 11
Nov 30, 2024
Distribution block, bridged internally, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 32 A, connection method: Push-in connection, number of co
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273790 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of levels 1
- Insulating material PA
- Color gray
- Overvoltage category III
- Nominal voltage UN 450 V
- Result of thermal test Test passed
- Test duration per axis 5 h
- Acceleration 30g
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Potentials 1
- Insulating material group I
- Maximum total current 63 A
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Static insulating material application in cold -60 °C
- Width 18.5 mm
- Degree of pollution 3
- Result of tight fit on support Test passed
- Nominal current IN 32 A
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Height 21.7 mm
- Conductor cross section solid min. 0.5 mm²
- Connection method Push-in connection
- Max. AWG conductor cross section, flexible 12
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141120
- ECLASS 6.0 27141100
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
- Rated surge voltage 6 kV
- Flammability rating according to UL 94 V0
- Open side panel No
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Number of shocks per direction 3
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 28.6 mm
- Conductor cross section AWG min. 24
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Internal cylindrical gage A4
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.0 27141120
- ECLASS 9.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Conductor cross section AWG max. 10
- Connection cross sections directly pluggable 0.5 mm² 6 mm² 20 10
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 7.0 27141120
- UNSPSC 13.2 39121410
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- ECLASS 5.0 27141120
- Nominal cross section 4 mm²
- Stripping length 10 mm ... 12 mm
- Conductor cross section solid max. 6 mm²
- Min. AWG conductor cross section, flexible 24
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- Maximum power dissipation for nominal condition 1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.1 27141120
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Number of connections 6
- Maximum load current 41 A (with 6 mm² conductor cross section)
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible max. 4 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141120
- ETIM 3.0 EC000897
- ETIM 2.0 EC000897
- UNSPSC 11 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.30
Stock:
11
Select Qty:
$3.30
$3.30 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
