3273384 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Back of the hand protection
  guaranteed
• Oscillation, broadband noise test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Width
  56.5 mm
• Conductor cross section solid min.
  1 mm²
• Min. AWG conductor cross section, flexible
  20
Number of levels
1
Insulating material
PA
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Maximum load current
57 A (with 10 mm² conductor cross section)
Test spectrum
Service life test category 2, bogie-mounted
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
28.6 mm
Conductor cross section solid max.
10 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141121
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
19
Color
brown
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section feed-in
6 mm²
Flammability rating according to UL 94
V0
Nominal voltage UN
450 V
Open side panel
No
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
21.7 mm
Stripping length
10 mm ... 12 mm
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 4.0
EC000897
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Value
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Internal cylindrical gage
A3
Connection method
Push-in connection
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²