3214081 Phoenix Contact Terminal Blocks

Product Details

• Insulating material group
  I
• Number of connections
  11
• Overvoltage category
  III
• Maximum power dissipation for nominal condition
  4.06 W (the value is multiplied when connecting multiple levels)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  2.2 kV
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Bending test turns
  135
• Setpoint
  10 N
• Requirements, voltage drop
  ≤ 1.6 mV
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test spectrum
  Service life test category 2, bogie-mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Nominal current IN
  41 A
• ETIM 4.0
  EC000897
• Number of levels
  1
• Degree of pollution
  2
• Maximum load current
  41 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Conductor cross section tensile test
0.5 mm²
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock test result
Test passed
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
UNSPSC 20.0
39121410
Width
16.3 mm
Conductor cross section solid min.
0.34 mm²
Note
In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered.
Flammability rating according to UL 94
V0
Connection method
Push-in connection
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
20 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
M6
Connection in acc. with standard
IEC 60947-7-1
Nominal voltage UN
1000 V
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141111
ETIM 7.0
EC000897
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Insulating material
PA
Acceleration
30g
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
110.4 mm
Stripping length
8 mm ... 10 mm
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121411
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
56.3 mm
Tightening torque max
3.7 Nm
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
2 conductors with same cross section, solid max.
16 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Two conductors with the same cross section, AWG stranded, max.
8
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Color
blue
Open side panel
No
Result of surge voltage test
Test passed
Short-time current
4.8 kA
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141127
Min. AWG conductor cross section, flexible
26
Two conductors with the same cross section, AWG solid min.
16
2 conductors with same cross section, stranded max.
10 mm²
Internal cylindrical gage
B9
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 6.01
30211812
UNSPSC 19.0
39121410
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Two conductors with the same cross section, AWG stranded, min.
16
ECLASS 11.0
27141120
ECLASS 4.1
27141127
ECLASS 6.0
27141100
UNSPSC 12.01
39121411
UNSPSC 21.0
39121410
Two conductors with the same cross section, AWG solid max.
6
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141127
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121411
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
UNSPSC 18.0
39121410
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Tightening torque, min
3.2 Nm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Height NS 35/7,5
48.8 mm
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
50 mm²