3213968 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.02 W
• Open side panel
  Yes
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.48 kA
• Result of aging test
  Test passed
• ECLASS 5.1
  27141100
• UNSPSC 7.0901
  39121410
• UNSPSC 20.0
  39121410
• Height NS 35/7,5
  44 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of connections
2
Insulating material
PA
Maximum load current
24 A (with 4 mm² conductor cross section)
Rated surge voltage
8 kV
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Connection in acc. with standard
CUL
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 10.0.1
27141125
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Potentials
1
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
24 A
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height
42.5 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 7.0
27141125
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
59.5 mm
Height NS 35/15
51.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141125
ECLASS 5.0
27141100
ECLASS 9.0
27141125
ETIM 7.0
EC001329
UNSPSC 13.2
39121410