3212301 Phoenix Contact Terminal Blocks
Part#:3212301
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Feed-through terminal block, connection method: Push-in connection, cross section: 0.5 mm² - 10 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3212301 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 11.0 27141126
- UNSPSC 7.0901 39121410
- Number of connections 2
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 1.31 W
- Nominal cross section 6 mm²
- Insulating material group I
- Nominal voltage UN 500 V
- Setpoint 5 N
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ASD level 1.857 (m/s2)2/Hz
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Width 8.2 mm
- Connection method Push-in connection
- Conductor cross section solid min. 1 mm²
- Conductor cross section AWG min. 20
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Internal cylindrical gage A5
- Result of thermal test Test passed
- Acceleration 5g
- Shock duration 30 ms
- Number of shocks per direction 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- End cover width 2.2 mm
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid max. 10 mm²
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- ETIM 4.0 EC000897
- Test spectrum Service life test category 1, class B, body mounted
- Test duration per axis 5 h
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 49.6 mm
- Height NS 35/15 57.1 mm
- Connection in acc. with standard CSA
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 6.0 27141100
- ETIM 6.0 EC000902
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Stripping length 12 mm
- Conductor cross section flexible min. 0.5 mm²
- Max. AWG conductor cross section, flexible 10
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ECLASS 4.0 27141100
- ETIM 7.0 EC000902
- UNSPSC 18.0 39121410
- Short-time current 1.25 kA
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Connection 1 level
- Length 114.9 mm
- Conductor cross section flexible max. 6 mm²
- Conductor cross section AWG max. 8
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141126
- ECLASS 5.0 27141100
- ECLASS 7.0 27141126
- Number of levels 1
- Insulating material PA
- Overvoltage category III
- Open side panel Yes
- Result of power-frequency withstand voltage test Test passed
- Result of surge voltage test Test passed
- Short circuit stability result Test passed
- UNSPSC 11 39121410
- Color gray
- Nominal current IN 30 A
- Tight fit on carrier NS 35
- Oscillation, broadband noise test result Test passed
- UNSPSC 12.01 39121410
- Maximum load current 30 A (with 10 mm² conductor cross section)
- Power frequency withstand voltage setpoint 2.21 kV
- Conductor cross section short circuit testing 4 mm²
- ECLASS 9.0 27141126
- Potentials 1
- Degree of pollution 3
- Result of tight fit on support Test passed
- Rated surge voltage 6 kV
- UNSPSC 20.0 39121410
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- UNSPSC 19.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨