3211814 Phoenix Contact Terminal Blocks

Product Details

• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Rated surge voltage
  8 kV
• Connection in acc. with standard
  CSA
• Conductor cross section AWG max.
  8
• Insulating material
  PA
• Nominal voltage UN
  1000 V
• Result of flexion and pull-out test
  Test passed
• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ETIM 7.0
  EC000897
• UNSPSC 13.2
  39121410
• Overvoltage category
  III
• Conductor cross section solid min.
  1 mm²
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Nominal cross section
6 mm²
Degree of pollution
3
Nominal current IN
41 A
Setpoint
5 N
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 5.0
27141100
UNSPSC 11
39121410
Color
black
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Internal cylindrical gage
A5
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2.2 kV
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Potentials
1
Insulating material group
I
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Open side panel
Yes
Surge voltage test setpoint
9.8 kV
Result of tight fit on support
Test passed
Conductor cross section tensile test
10 mm²
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
6 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
8.2 mm
Connection method
Push-in connection
Height NS 35/15
51 mm
UNSPSC 21.0
39121410
Number of levels
1
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tractive force setpoint
90 N
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Height
42.2 mm
Maximum load current
52 A (with 10 mm² conductor cross section, rigid)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
57.7 mm
Connection
1 level
Short circuit stability result
Test passed
Short-time current
0.72 kA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Stripping length
12 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Tight fit on carrier
NS 35
Number of connections
2
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03