3211447 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
• Insulating material
  PA
• Degree of pollution
  3
• Overvoltage category
  III
• Nominal current IN
  0.5 A
• Finger protection
  guaranteed
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Short circuit stability result
  Test passed
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Number of levels
  2
• Color
  gray
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum load current
  0.5 A
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Setpoint
1 N
Result of aging test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Width
5.2 mm
Height NS 35/15
55 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141127
ETIM 6.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of connections
4
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Length
68 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000903
UNSPSC 19.0
39121410
ECLASS 11.0
27141127
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
End cover width
2.2 mm
Height NS 35/7,5
47.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141127
ECLASS 4.1
27141100
ECLASS 7.0
27141127
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410