3210266 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Maximum load current
  0.5 A (with 4 mm² conductor cross section, rigid)
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short-time current
  0.48 kA
• Test spectrum
  Service life test category 1, class B, body mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  2.2 mm
• Conductor cross section solid max.
  4 mm²
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Connection
1 level
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000903
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Number of connections
4
Insulating material group
I
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
44 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000903
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
5g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Length
72 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141127
ECLASS 6.0
27141100
ECLASS 7.0
27141127
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Note
Measured with diode.
Potentials
1
Flammability rating according to UL 94
V0
Nominal current IN
0.5 A
Back of the hand protection
guaranteed
Bending test turns
135
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Connection in acc. with standard
CSA
ECLASS 11.0
27141127
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141127
ETIM 4.0
EC000897
UNSPSC 12.01
39121410