3060267 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  3
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A (observe derating)
• Result of surge voltage test
  Test passed
• Open side panel
  Yes
• Result of thermal test
  Test passed
• ASD level
  0.02 g²/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  30 ms
• Short-time current
  0.48 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• End cover width
  2.2 mm
• Stripping length
  9 mm
• Conductor cross section AWG max.
  10
• Conductor cross section flexible max.
  6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of positions
1
Color
gray
Flammability rating according to UL 94
V0
Maximum load current
32 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Tight fit on carrier
NS 35
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
6.2 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Potentials
1
Degree of pollution
3
Insulating material group
I
Setpoint
1 N
Short circuit stability result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw/plug-in connection
Tightening torque max
0.8 Nm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Nominal cross section
4 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W
Nominal voltage UN
500 V
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
55.7 mm
Screw thread
M3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Operating temperature
-60 °C (maximum operating temperature see derating curve)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Tightening torque, min
0.6 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410