3049107 Phoenix Contact Terminal Blocks
Part#:3049107
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 4
Nov 23, 2024
High Current Connectors, nom. voltage: 1000 V, nominal current: 76 A, connection method: Bolt connection, number of connections: 1, width: 13 mm, height: 56.1 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3049107 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Tight fit on carrier NS 35
- Conductor cross section short circuit testing 16 mm²
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Nominal cross section 16 mm²
- Rated surge voltage 8 kV
- Nominal current IN 76 A
- Maximum load current 76 A (with 16 mm² conductor cross section)
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of power-frequency withstand voltage test Test passed
- Bending test turns 135
- Result of temperature-rise test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Color gray
- Insulating material group I
- Maximum power dissipation for nominal condition 2.43 W
- Back of the hand protection guaranteed
- Result of tight fit on support Test passed
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Number of levels 1
- Flammability rating according to UL 94 V0
- Degree of pollution 3
- Open side panel No
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Short circuit stability result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Overvoltage category III
- Finger protection guaranteed
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Width 13 mm
- Cable lug connection according to standard DIN 46237:1970-07
- Hole diameter, min. 5.3 mm
- Insulating material PA
- Connection in acc. with standard CSA
- Setpoint 5 N
- Short-time current 1.92 kA
- Acceleration 30g
- Number of connections 1
- Nominal voltage UN 1000 V
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 2.2 kV
- Shock form Half-sine
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Height NS 35/15 64.3 mm
- Min. cross section for cable lug connection 1 mm²
- Max. cross section for cable lug connection 6 mm²
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27141100
- ETIM 2.0 EC000897
- ECLASS 9.0 27141120
- UNSPSC 18.0 39121410
- UNSPSC 13.2 39121410
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Shock duration 18 ms
- Length 64 mm
- Height 56.1 mm
- Height NS 35/7,5 56.8 mm
- Screw thread M5
- Bolt diameter 5 mm
- Tightening torque max 4 Nm
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141100
- ETIM 3.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Bolt length 22.5 mm
- Connection method Bolt connection
- Cable lug width, max. 10 mm
- Tightening torque, min 2 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.0 27141100
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$17.82
Stock:
4
Select Qty:
$17.82
$17.82 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
