3047727 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 18.0
  39121410
• UNSPSC 13.2
  39121410
• ECLASS 6.0
  27141100
• UNSPSC 6.01
  30211811
• ECLASS 11.0
  27141120
• UNSPSC 21.0
  39121410
• ETIM 7.0
  EC000897
• UNSPSC 11
  39121410
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  1.5 mm²
• Conductor cross section solid max.
  50 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  35 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• 2 conductors with same cross section, solid min.
  1.5 mm²
• ECLASS 9.0
  27141120
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Color
  gray
• Maximum power dissipation for nominal condition
  4.06 W
• Result of surge voltage test
  Test passed
• Bending test turns
  135
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
73.2 mm
Tightening torque max
3.7 Nm
Conductor cross section AWG max.
1/0
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Potentials
1
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Setpoint
10 N
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
Insulating material
PA
Insulating material group
I
Nominal voltage UN
1000 V
Bending test rotation speed
10 rpm
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
50 mm²
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
16 mm
Length
61.2 mm
Screw thread
M6
Conductor cross section solid min.
1.5 mm²
Max. AWG conductor cross section, flexible
1
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Number of levels
1
Number of connections
2
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Nominal current IN
125 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Short-time current
6 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Nominal cross section
35 mm²
Rated surge voltage
8 kV
Maximum load current
150 A (with 50 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
65.1 mm
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
65.7 mm
Tightening torque, min
3.2 Nm
Conductor cross section AWG min.
16
Conductor cross section flexible max.
50 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
2 conductors with same cross section, solid max.
16 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
Min. AWG conductor cross section, flexible
16
ETIM 6.0
EC000897
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible min.
1.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Internal cylindrical gage
B9
Stripping length
18 mm
Connection in acc. with standard
CSA
2 conductors with same cross section, stranded max.
10 mm²