3044733 Phoenix Contact Terminal Blocks

Product Details

• Number of shocks per direction
  3
• UNSPSC 20.0
  39121410
• UNSPSC 19.0
  39121410
• End cover width
  2.2 mm
• Screw thread
  M3
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 9.0
  27141120
• Internal cylindrical gage
  A4
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 5.0
  27141100
• UNSPSC 7.0901
  39121410
• UNSPSC 6.01
  30211811
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• ECLASS 11.0
  27141120
• ECLASS 6.0
  27141100
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000901
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
ETIM 6.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
64.4 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Stripping length
9 mm
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Insulating material
PA
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Result of surge voltage test
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Number of levels
2
Flammability rating according to UL 94
V0
Maximum load current
36 A (with 6 mm² conductor cross section)
Nominal current IN
30 A
Number of connections
4
Area of application
Railway industry
Degree of pollution
3
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
65 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Tightening torque max
0.8 Nm
ECLASS 10.0.1
27141120
Color
gray
Overvoltage category
III
Nominal voltage UN
800 V
Finger protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Width
6.2 mm
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Length
69.9 mm
Height NS 35/15
72.5 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ECLASS 5.1
27141100
ETIM 2.0
EC000901
ETIM 4.0
EC000901
UNSPSC 11
39121410
UNSPSC 21.0
39121410