3037054 Phoenix Contact Terminal Blocks

Product Details

• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  0.02 g²/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Semi-sinusoidal
• Connection method
  Spring-cage connection
• Conductor cross section solid max.
  1.5 mm²
• Min. AWG conductor cross section, flexible
  28
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 10.0.1
  27141120
• ECLASS 5.0
  27141100
• Test duration per axis
  5 h
• Shock duration
  30 ms
• Width
  4.2 mm
• Connection
  1 level
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section AWG min.
  28
• Max. AWG conductor cross section, flexible
  16
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Shock test result
  Test passed
Height NS 35/15
44 mm
Conductor cross section solid min.
0.08 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Potentials
1
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Color
white
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of surge voltage test
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Internal cylindrical gage
A1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 3.0
EC000897
Number of connections
2
Flammability rating according to UL 94
V0
Nominal current IN
17.5 A
Finger protection
guaranteed
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Nominal cross section
1.5 mm²
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Acceleration
5g
Height NS 35/7,5
36.5 mm
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Open side panel
Yes
Bending test turns
135
Oscillation, broadband noise test result
Test passed
Length
48.5 mm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of levels
1
Result of tight fit on support
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811