3035695 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 21.0
  39121410
• ECLASS 11.0
  27141126
• UNSPSC 18.0
  39121410
• UNSPSC 11
  39121410
• UNSPSC 20.0
  39121410
• ECLASS 9.0
  27141126
• ETIM 7.0
  EC000902
• UNSPSC 7.0901
  39121410
• Nominal current IN
  30 A
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Nominal cross section
  6 mm²
• Insulating material
  PA
• Insulating material group
  I
• Color
  blue
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
0.72 mm²
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
49 mm
Connection method
Push-in connection
Number of levels
1
Degree of pollution
3
Nominal voltage UN
1000 V
Open side panel
Yes
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Potentials
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Back of the hand protection
guaranteed
Number of connections
2
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 3.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Conductor cross section AWG min.
20
Conductor cross section flexible max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Internal cylindrical gage
A5
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Short-time current
0.5 kA
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
Tensile test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
12 mm
Conductor cross section AWG max.
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
End cover width
2.2 mm
Height NS 35/15
57.1 mm
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Short circuit stability result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
49.6 mm
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 2.0
EC000902
UNSPSC 13.2
39121410
Setpoint
5 N
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Length
100.8 mm
Connection in acc. with standard
CSA
ECLASS 4.0
27141100
ETIM 4.0
EC000902