3002967 Phoenix Contact Terminal Blocks

Product Details

• Result of power-frequency withstand voltage test
  Test passed
• Result of temperature-rise test
  Test passed
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock test result
  Test passed
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Maximum total current
  26 A
• Nominal voltage UN
  500 V
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35/NS 15
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Number of levels
1
Number of connections
6
Insulating material
PA
Insulating material group
I
Back of the hand protection
guaranteed
Finger protection
guaranteed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
0.0013888888889 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Ambient temperature (assembly)
-5 °C ... 70 °C
Nominal cross section
1.5 mm²
Degree of pollution
3
Maximum load current
22 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test turns
135
Bending test rotation speed
10 rpm
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 15
27.4 mm
Length
21.6 mm
Conductor cross section AWG max.
14
Conductor cross section flexible max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Internal cylindrical gage
A1 / B1
ECLASS 4.1
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
black
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Nominal current IN
17.5 A
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
12.5 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141120