Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2981839 Phoenix Contact Electrical Safety Devices

Phoenix Contact 2981839 Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, plug-in screw terminal block, width: 22.5 mm
Phoenix Contact

Part#:2981839

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, plug-in screw terminal block, width: 22.5 mm

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2981839 Phoenix Contact price in the box on the right side or send a quick quote.

2981839 Product Details

  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 70 °C
  • Maximum altitude
    max. 2000 m (Above sea level)
  • Height
    114.5 mm
  • Ambient temperature (operation)
    -20 °C ... 55 °C
  • Rated control circuit supply voltage US
    24 V AC/DC -15 % / +10 %
  • Recovery time
    < 500 ms
  • Operating voltage display
    1 x green LED
  • Maximum switching frequency
    0.5 Hz
  • Limiting continuous current
    6 A (N/O contact)
  • Inrush current, minimum
    10 mA
  • Interrupting rating (ohmic load) max.
    For additional values, see load curve
  • Switching capacity according to IEC 60947-5-1
    5 A (24 V (DC13))
  • Relay type
    Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
  • Mounting type
    DIN rail mounting
  • pluggable
    Yes
  • Screw thread
    M3
  • Designation
    Air clearances and creepage distances between the power circuits
  • Category
    1
  • Overvoltage category
    III
  • Conformance
    CE-compliant
  • ECLASS 4.1
    27371100
  • ECLASS 6.0
    27371600
  • ECLASS 7.0
    27371601
  • ETIM 3.0
    EC001449
  • UNSPSC 6.01
    30211901
  • UNSPSC 19.0
    39122334
  • Stripping length
    7 mm
  • Stop category
    0
  • Standards/regulations
    DIN EN 50178
  • Rated surge voltage/insulation
    4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 11.0
    27371819
  • ECLASS 5.0
    27371600
  • Width
    22.5 mm
  • Max. permissible relative humidity (operation)
    75 % (on average, 85% infrequently, non-condensing)
  • Rated control supply current IS
    typ. 45 mA
  • Typ. starting time with Us
    typ. 15 ms (when controlled via A1)
  • Protective circuit
    Surge protection Suppressor diode
  • Contact type
    3 enabling current paths
  • Maximum inrush current
    8 A
  • Switching capacity
    min. 50 mW
  • Maximum interrupting rating (inductive load)
    48 W (N/O contact, 24 V DC, τ = 40 ms)
  • Net weight
    126.9 g
  • Degree of protection
    IP20
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Conductor cross-section AWG
    24 ... 12
  • Safety Integrity Level Claim Limit (SIL CL)
    1
  • UNSPSC 12.01
    39121501
  • Depth
    99 mm
  • Max. permissible humidity (storage/transport)
    75 % (on average, 85% infrequently, non-condensing)
  • Input voltage range
    20.4 V AC/DC ... 26.4 V AC/DC
  • Power consumption at US
    typ. 1.08 W
  • Minimum switching voltage
    5 V AC/DC
  • Contact material
    AgSnO2
  • Mechanical service life
    10x 106 cycles
  • Nominal operating mode
    100% operating factor
  • Housing material
    PBT
  • Connection method
    Screw connection
  • Torque
    0.6 Nm
  • Performance level (PL)
    c
  • Rated insulation voltage
    250 V
  • Vibration (operation)
    10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
  • ECLASS 10.0.1
    27371601
  • ECLASS 4.0
    27371100
  • ECLASS 5.1
    27371600
  • ETIM 4.0
    EC001449
  • ETIM 7.0
    EC001437
  • UNSPSC 7.0901
    39121501
  • UNSPSC 18.0
    39122334
  • UNSPSC 20.0
    39122334
  • Typical release time
    typ. 15 ms (when controlled via A1)
  • Inrush current
    typ. 350 mA DC (Δt < 1 µs at Us)
  • Maximum switching voltage
    230 V AC/DC (Observe the load curve)
  • Sq. Total current
    48 A2
  • Output fuse
    10 A gL/gG (N/O contact)
  • Mounting position
    vertical or horizontal
  • Min. degree of protection of inst. location
    IP54
  • Housing color
    yellow
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Safety Integrity Level (SIL)
    1
  • Degree of pollution
    2
  • Shock
    15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 2.0
    EC001449
  • ECLASS 9.0
    27371601
  • ETIM 6.0
    EC001437
  • UNSPSC 11
    39121501
  • UNSPSC 13.2
    39121501
  • UNSPSC 21.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo