2967646 Phoenix Contact Relays
Part#:2967646
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input volta
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2967646 Phoenix Contact price in the box on the right side or send a quick quote.
2967646 Product Details
- ETIM 2.0 EC001437
- UNSPSC 6.01 30211916
- UNSPSC 13.2 39122334
- Typical release time 10 ms
- Contact type 1 changeover contact
- Min. switching current 10 mA (at 12 V)
- Switching capacity 2 A (at 24 V, DC13)
- Test voltage 4 kV AC (50 Hz, 1 min., winding/contact)
- Mechanical service life 3x 107 cycles
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Connection in acc. with standard CUL
- Insulation Safe isolation, reinforced insulation
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27371601
- ECLASS 7.0 27371601
- ETIM 3.0 EC001437
- UNSPSC 7.0901 39121515
- UNSPSC 18.0 39122334
- Height 80 mm
- Depth 94 mm
- Nominal input voltage UN 48 V DC
- Protective circuit Reverse polarity protection Polarity protection diode
- Contact material AgNi
- Maximum inrush current 30 A (300 ms)
- Interrupting rating (ohmic load) max. 240 W (at 24 V DC)
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Stripping length 8 mm
- Standards/regulations IEC 60664
- Identification ISA-S71.04. G3 Harsh Group
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27371100
- ECLASS 9.0 27371601
- ETIM 7.0 EC001437
- UNSPSC 11 39121515
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 60 °C
- Typical input current at UN 20 mA
- Power dissipation for nominal condition 0.96 W
- Type of switch contact Single contact
- Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Limiting continuous current 10 A
- Flammability rating according to UL 94 V0 (Housing)
- Connection method Screw connection
- Screw thread M3
- Designation Corrosive gas test
- Pollution degree 2
- ECLASS 10.0.1 27371601
- ECLASS 5.0 27371600
- ECLASS 6.0 27371600
- ETIM 6.0 EC001437
- UNSPSC 19.0 39122334
- UNSPSC 21.0 39122334
- Width 14 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of protection RT II (Relay)
- Typical response time 8 ms
- Operating voltage display Yellow LED
- Minimum switching voltage 12 V DC (at 10 mA)
- Interrupting rating (ohmic load) max. bridged 144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
- Mounting position any
- Connection name Contact side
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Conductor cross section AWG 26 ... 14
- Rated surge voltage 6 kV
- Overvoltage category III
- ECLASS 4.0 27371100
- ECLASS 5.1 27371600
- ETIM 4.0 EC001437
- UNSPSC 12.01 39121515
- UNSPSC 20.0 39122334
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨