2963996 Phoenix Contact Electrical Safety Devices
Part#:2963996
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 6
04/19/2024
About the product: Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, single- or two-channel operation, 8 enabling current paths, US = 24 V AC/DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2963996 Phoenix Contact price in the box on the right side or send a quick quote.
2963996 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Power consumption at US typ. 4.25 W (AC)
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Typ. starting time with Us < 500 ms (when controlled via A1)
- Protective circuit Surge protection Suppressor diode and varistors
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Inrush current, minimum 10 mA
- Switching capacity min. 50 mW
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Mounting position any
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stop category 0
- Standards/regulations DIN EN 50178/VDE 0160
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.1 40020600
- ETIM 2.0 EC000196
- ETIM 7.0 EC001449
- ETIM 4.0 EC001449
- UNSPSC 20.0 39122205
- Height 112 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Current consumption < 50 mA (with Us/Ix to S10)
- Operating voltage display 1 x green LED
- Recovery time < 1 s
- Status display 2 x green LEDs
- Minimum switching voltage 5 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) e
- Overvoltage category III
- Degree of pollution 2
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ETIM 6.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current 2 A (Δt = 10 ms at Us)
- Maximum switching frequency 0.5 Hz
- Contact material AgSnO2
- Sq. Total current 50 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Nominal operating mode 100% operating factor
- Housing material PBT
- Conductor cross-section AWG 24 ... 16
- Designation Air clearances and creepage distances between the power circuits
- Category 4
- Conformance CE-compliant
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- UNSPSC 6.01 30211901
- UNSPSC 18.0 39122205
- Width 45 mm
- Rated control supply current IS typ. 177 mA AC
- Typical response time < 380 ms (automatic start)
- Concurrence ∞
- Filter time 2 ms (at A1 in the event of voltage dips at Us)
- Maximum inrush current 20 A (Δt 100 ms)
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms)
- Mounting type DIN rail mounting
- Housing color yellow
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Safety Integrity Level (SIL) 3
- Rated insulation voltage 250 V AC
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- ETIM 3.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 21.0 39122205
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
- Typical release time < 20 ms (when controlled via S11/S12 and S21/S22)
- Max. permissible overall conductor resistance approx. 11 Ω (Input and start circuits at US)
- Contact type 8 enabling current paths
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Output fuse 10 A gL/gG (N/O contact)
- Net weight 426.1 g
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Safety Integrity Level Claim Limit (SIL CL) 3
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 63/64, 73/74, 83/84between S10/S11/S12/S33/S34/S35 and 63/64, 73/74, 83/84between 63/64, 73/74, 83/84 among one another
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 6.0 27371800
- ECLASS 9.0 27371819
- UNSPSC 11 39121501
- UNSPSC 13.2 39121501
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$700.78
2963996
Stock:
6
Select Qty:
$700.78
$700.78 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
