2924294 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924294
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection, 3-way electrical isolation, SIL 2, Push-in connection.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924294 Phoenix Contact price in the box on the right side or send a quick quote.
2924294 Product Details
- Switching points (unattenuated) > 2.1 mA (conductive)
- Contact type 1 N/O contact per channel
- Switching output Relay output
- Power dissipation < 1 W
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Housing material PA 6.6-FR
- Degree of pollution 2
- Equipment type Type A
- λDD 6 x 10-9 (6 FIT)
- Probability of a hazardous failure on demand (PFDAVG) 3.01 x 10-4 (1 year)
- Noise immunity EN 61000-6-2 EN 61326
- Short-circuit current ~ 8 mA
- Contact material AgSnO2, hard gold-plated
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Stripping length 8 mm
- Color gray
- Rated insulation voltage 300 Vrms
- λDU 6.2 x 10-8 (62 FIT)
- Switching frequency ≤ 20 Hz (without load)
- Maximum switching capacity 500 VA
- Power consumption < 1 W
- Conductor cross section AWG 24 ... 16
- Integrity requirement IEC 61508 - Low demand
- Width 12.5 mm
- Maximum altitude ≤ 2000 m
- Available input sources NAMUR proximity sensors (EN 60947-5-6)
- DNV GL-Vibration A
- Humidity B
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27210100
- ECLASS 7.0 27210121
- ETIM 3.0 EC001485
- UNSPSC 13.2 39121008
- UNSPSC 11 39121008
- Degree of protection IP20 (not assessed by UL)
- Line fault detection Break 0.05 mA < IIN < 0.35 mA
- Maximum switching voltage 250 V AC (2 A)
- Nominal supply voltage 24 V DC
- Connection method Push-in connection
- Height 116 mm
- λSD 1 x 10-9 (1 FIT)
- Noise emission EN 61000-6-4
- DNV GL-Temperature B
- Identification 2
- Certificate DNV GL TAA00000AG
- ECLASS 10.0.1 27210121
- Non-load voltage ~ 8 V DC
- Switching points (attenuated) < 1.2 mA (blocking)
- Switching hysteresis < 0.2 mA
- Mechanical service life 107 cycles
- Max. current consumption 35 mA (24 V DC)
- Safe Failure Fraction (SFF) 78 %
- Evaluation criterion A
- Depth 114.5 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- DNV GL-Humidity B
- DNV GL-EMC B
- Temperature B
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.1 27210100
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- EMC B
- Vibration A
- ECLASS 5.0 27210100
- ETIM 2.0 EC001485
- Designation Safety Integrity Level (SIL, IEC 61508)
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Diagnostic coverage (DC) DCS = 0.4 %, DCD = 8 %
- ATEX II 3 G Ex nA nC IIC T4 Gc X
- Interference emission EN 61000-6-4
- Status display Green LED (supply voltage)
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Overvoltage category III
- Safety Integrity Level (SIL) 2
- Conformance CE-compliant, additionally EN 61326-1
- Standards/regulations EN 61000-4-6
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- No. of channels 2
- Electromagnetic compatibility Conformance with EMC directive
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- λSU 2.48 x 10-7 (248 FIT)
- ECLASS 11.0 27210121
- China RoHS Environmentally Friendly Use Period = 50 years
- UL, USA/Canada UL 508 Listed
- ETIM 6.0 EC001485
- ECLASS 5.1 27210100
- ETIM 7.0 EC001485
- UNSPSC 20.0 39121008
- Additional text and EN 61326-1
- ECLASS 6.0 27210100
- UNSPSC 7.0901 39121008
- UNSPSC 18.0 39121008
- ECLASS 9.0 27210121
- UNSPSC 12.01 39121008
- UNSPSC 21.0 39121008
- ETIM 4.0 EC001485
- UNSPSC 6.01 30211506
- UNSPSC 19.0 39121008
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2924294
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨