Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2910533 Phoenix Contact Relays

Phoenix Contact 2910533 PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Input voltage: 120 V AC / 110 V DC14 mm PLC basic terminal block without relay, for mountin
Phoenix Contact

Part#:2910533

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Input voltage: 120 V AC / 110 V DC14 mm PLC basic terminal block without relay, for mountin

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2910533 Phoenix Contact price in the box on the right side or send a quick quote.

2910533 Product Details

  • Depth
    104 mm
  • Height
    80 mm
  • Maximum altitude
    ≤ 2000 m
  • Typical release time
    8 ms (110 V DC)
  • Contact type
    1 changeover contact
  • Min. switching current
    10 mA (12 V)
  • Operating mode
    100% operating factor
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Mounting position
    any
  • Ambient temperature (storage/transport)
    -20 °C ... 85 °C
  • Protective circuit
    Bridge rectifier Bridge rectifier
  • Interrupting rating (ohmic load) max.
    264 W (24 V DC)
  • Typical input current at UN
    5 mA
  • Operating voltage display
    Yellow LED
  • Switching capacity
    2 A (24 V, DC13)
  • Degree of protection
    RT II (Relay)
  • Typical release time range
    3 ms ... 15 ms (120 V AC)
  • Contact material
    AgNi
  • Width
    14 mm
  • Type of switch contact
    Single contact
  • Flammability rating according to UL 94
    V0 (Housing)
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Stripping length
    8 mm
  • Conductor cross section AWG
    26 ... 14
  • ECLASS 5.0
    27371600
  • ECLASS 9.0
    27371601
  • UNSPSC 6.01
    30211916
  • UNSPSC 12.01
    39121515
  • UNSPSC 21.0
    39122334
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Minimum switching voltage
    12 V (10 mA)
  • Rated insulation voltage
    250 V AC
  • Rated surge voltage
    6 kV
  • ECLASS 10.0.1
    27371601
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 3.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 20.0
    39122334
  • Nominal input voltage UN
    120 V AC
  • Typical response time
    6 ms (110 V DC)
  • Limiting continuous current
    10 A
  • Connection method
    Push-in connection
  • Designation
    Corrosive gas test
  • Overvoltage category
    III
  • ECLASS 11.0
    27371601
  • ECLASS 5.1
    27371600
  • ETIM 4.0
    EC001437
  • UNSPSC 13.2
    39122334
  • Maximum inrush current
    24 A (20 ms)
  • Mechanical service life
    5x 106 cycles
  • Connection name
    Contact side
  • Standards/regulations
    EN 50178
  • Pollution degree
    2
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 7.0
    27371601
  • ETIM 2.0
    EC001437
  • ETIM 7.0
    EC001437
  • UNSPSC 18.0
    39122334
  • UNSPSC 19.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (operation)
    -20 °C ... 55 °C
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Insulation
    Safe isolation, reinforced insulation
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 6.0
    27371600
  • ETIM 6.0
    EC001437
  • UNSPSC 11
    39121515

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo