2910532 Phoenix Contact Relays
Part#:2910532
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 1 changeover contact, Input voltage: 48 V DC14 mm PLC basic terminal block without relay,
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2910532 Phoenix Contact price in the box on the right side or send a quick quote.
2910532 Product Details
- Coil voltage 24 V DC
- Contact material AgNi
- Interrupting rating (ohmic load) max. 264 W (24 V DC)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Connection method Push-in connection
- Rated surge voltage 6 kV
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27371601
- ECLASS 5.1 27371600
- ETIM 2.0 EC001437
- UNSPSC 7.0901 39121515
- UNSPSC 18.0 39122334
- Typical input current at UN 19 mA
- Minimum switching voltage 12 V (10 mA)
- Min. switching current 10 mA (at 12 V)
- Mechanical service life 5x 106 cycles
- Stripping length 8 mm
- Conductor cross section AWG 26 ... 14
- Overvoltage category III
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27371600
- ETIM 3.0 EC001437
- UNSPSC 6.01 30211916
- UNSPSC 13.2 39122334
- UNSPSC 20.0 39122334
- Typical release time 10 ms
- Operating voltage display Yellow LED
- Maximum inrush current 24 A (20 ms)
- Switching capacity 1 A (24 V, DC13)
- Limiting continuous current 10 A
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Standards/regulations EN 50178
- Pollution degree 2
- ECLASS 10.0.1 27371601
- ECLASS 9.0 27371601
- ECLASS 7.0 27371601
- ETIM 7.0 EC001437
- UNSPSC 12.01 39121515
- UNSPSC 19.0 39122334
- Maximum altitude ≤ 2000 m
- Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Flammability rating according to UL 94 V0 (Housing)
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Designation Corrosive gas test
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 5.0 27371600
- ETIM 4.0 EC001437
- ETIM 6.0 EC001437
- UNSPSC 11 39121515
- UNSPSC 21.0 39122334
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Typical response time 6 ms
- Type of switch contact Single contact
- Connection name Contact side
- Rated insulation voltage 250 V AC
- Depth 104 mm
- Degree of protection RT II (Relay)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 60 °C
- Contact type 1 changeover contact
- Height 80 mm
- Nominal input voltage UN 48 V DC
- Protective circuit Bridge rectifier Bridge rectifier
- Mounting position any
- Width 14 mm
- Insulation Safe isolation, reinforced insulation
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨