Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2910521 Phoenix Contact Relays

Phoenix Contact 2910521 PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 2 changeover contacts, Input voltage: 48 V DC14 mm PLC basic terminal block without relay,
Phoenix Contact

Part#:2910521

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 2 changeover contacts, Input voltage: 48 V DC14 mm PLC basic terminal block without relay,

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2910521 Phoenix Contact price in the box on the right side or send a quick quote.

2910521 Product Details

  • Degree of protection
    RT II (Relay)
  • Protective circuit
    Bridge rectifier
  • Width
    14 mm
  • Ambient temperature (storage/transport)
    -20 °C ... 85 °C
  • Typical input current at UN
    19 mA
  • Operating voltage display
    Yellow LED
  • Min. switching current
    10 mA (12 V)
  • Operating mode
    100% operating factor
  • Connection name
    Contact side
  • Height
    80 mm
  • Maximum altitude
    ≤ 2000 m
  • Typical response time
    6 ms
  • Contact material
    AgNi
  • Limiting continuous current
    6 A
  • Mechanical service life
    5x 106 cycles
  • Connection method
    Push-in connection
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Overvoltage category
    III
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27371600
  • ECLASS 9.0
    27371601
  • Depth
    104 mm
  • Nominal input voltage UN
    48 V DC
  • Type of switch contact
    Single contact
  • Maximum inrush current
    12 A (20 ms)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Stripping length
    8 mm
  • Rated insulation voltage
    250 V AC
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 6.0
    27371600
  • ETIM 4.0
    EC001437
  • UNSPSC 11
    39121515
  • UNSPSC 18.0
    39122334
  • Typical release time
    10 ms
  • Contact type
    2 changeover contacts
  • Switching capacity
    1 A (24 V, DC13)
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Mounting position
    any
  • Designation
    Corrosive gas test
  • Rated surge voltage
    6 kV
  • Standards/regulations
    EN 50178
  • ECLASS 10.0.1
    27371601
  • ECLASS 5.1
    27371600
  • ETIM 3.0
    EC001437
  • ETIM 7.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Insulation
    Safe isolation, reinforced insulation
  • ECLASS 11.0
    27371601
  • ETIM 2.0
    EC001437
  • ETIM 6.0
    EC001437
  • UNSPSC 12.01
    39121515
  • UNSPSC 19.0
    39122334
  • Pollution degree
    2
  • ECLASS 7.0
    27371601
  • UNSPSC 6.01
    30211916
  • UNSPSC 7.0901
    39121515
  • UNSPSC 20.0
    39122334
  • Conductor cross section AWG
    26 ... 14
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (operation)
    -20 °C ... 60 °C
  • Minimum switching voltage
    12 V (10 mA)
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Interrupting rating (ohmic load) max.
    192 W (24 V DC)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo