Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2910518 Phoenix Contact Relays

Phoenix Contact 2910518 PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Input voltage: 230 V AC / 220 V DC14 mm PLC basic terminal block without relay, for mounting
Phoenix Contact

Part#:2910518

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Input voltage: 230 V AC / 220 V DC14 mm PLC basic terminal block without relay, for mounting

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2910518 Phoenix Contact price in the box on the right side or send a quick quote.

2910518 Product Details

  • Stripping length
    8 mm
  • Rated insulation voltage
    250 V AC
  • Overvoltage category
    III
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27371600
  • ECLASS 7.0
    27371601
  • ECLASS 9.0
    27371601
  • UNSPSC 6.01
    30211916
  • ETIM 3.0
    EC001437
  • UNSPSC 20.0
    39122334
  • Width
    14 mm
  • Depth
    104 mm
  • Typical input current at UN
    5 mA
  • Typical release time
    8 ms (220 V DC)
  • Typical release time range
    3 ms ... 15 ms (230 V AC)
  • Type of switch contact
    Single contact
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Maximum inrush current
    24 A (20 ms)
  • Operating mode
    100% operating factor
  • Flammability rating according to UL 94
    V0 (Housing)
  • Connection name
    Contact side
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section AWG
    26 ... 14
  • Pollution degree
    2
  • ECLASS 5.1
    27371600
  • ECLASS 10.0.1
    27371601
  • UNSPSC 19.0
    39122334
  • UNSPSC 18.0
    39122334
  • Height
    80 mm
  • Ambient temperature (operation)
    -20 °C ... 50 °C
  • Nominal input voltage UN
    230 V AC
  • Typical response time
    6 ms (220 V DC)
  • Protective circuit
    Bridge rectifier Bridge rectifier
  • Contact material
    AgNi
  • Limiting continuous current
    10 A
  • Min. switching current
    10 mA (at 12 V)
  • Switching capacity
    2 A (24 V, DC13)
  • Mechanical service life
    5x 106 cycles
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Designation
    Corrosive gas test
  • Screw thread
    M3
  • Rated surge voltage
    6 kV
  • ECLASS 6.0
    27371600
  • UNSPSC 21.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -20 °C ... 85 °C
  • Maximum altitude
    ≤ 2000 m
  • Degree of protection
    RT II (Relay)
  • Contact type
    1 changeover contact
  • Operating voltage display
    Yellow LED
  • Minimum switching voltage
    12 V (10 mA)
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Interrupting rating (ohmic load) max.
    264 W (24 V DC)
  • Mounting position
    any
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Standards/regulations
    EN 50178
  • Insulation
    Safe isolation, reinforced insulation
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 11.0
    27371601
  • UNSPSC 7.0901
    39121515
  • ETIM 2.0
    EC001437
  • UNSPSC 11
    39121515
  • ETIM 6.0
    EC001437
  • ETIM 4.0
    EC001437
  • UNSPSC 13.2
    39122334
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 7.0
    EC001437
  • UNSPSC 12.01
    39121515

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo