2910514 Phoenix Contact Relays
Part#:2910514
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Screw connection, 1 changeover contact, Input voltage: 24 V DC14 mm PLC basic terminal block without relay, fo
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2910514 Phoenix Contact price in the box on the right side or send a quick quote.
2910514 Product Details
- Coil voltage 24 V DC
- Mounting position any
- Connection method Screw connection
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Conductor cross section AWG 26 ... 14
- Rated insulation voltage 250 V AC
- ECLASS 11.0 27371601
- ECLASS 5.1 27371600
- ETIM 7.0 EC001437
- ETIM 3.0 EC001437
- UNSPSC 12.01 39121515
- UNSPSC 18.0 39122334
- UNSPSC 21.0 39122334
- Depth 104 mm
- Ambient temperature (operation) -20 °C ... 60 °C
- Nominal input voltage UN 24 V DC
- Typical input current at UN 18 mA
- Protective circuit Reverse polarity protection Polarity protection diode
- Operating voltage display Yellow LED
- Type of switch contact Single contact
- Mechanical service life 5x 106 cycles
- Assembly instructions In rows with zero spacing
- Stripping length 8 mm
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Designation Corrosive gas test
- Identification ISA-S71.04. G3 Harsh Group
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27371601
- ECLASS 7.0 27371601
- ECLASS 9.0 27371601
- ETIM 6.0 EC001437
- UNSPSC 7.0901 39121515
- UNSPSC 11 39121515
- UNSPSC 20.0 39122334
- UNSPSC 13.2 39122334
- Ambient temperature (storage/transport) -20 °C ... 85 °C
- Degree of protection RT II (Relay)
- Contact type 1 changeover contact
- Contact material AgNi
- Minimum switching voltage 12 V (10 mA)
- Limiting continuous current 10 A
- Maximum inrush current 24 A (20 ms)
- Interrupting rating (ohmic load) max. 264 W (24 V DC)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Switching capacity 2 A (24 V, DC13)
- Operating mode 100% operating factor
- Flammability rating according to UL 94 V0 (Housing)
- Connection name Contact side
- Screw thread M3
- Standards/regulations EN 50178
- Insulation Safe isolation, reinforced insulation
- Pollution degree 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27371600
- ECLASS 6.0 27371600
- ETIM 2.0 EC001437
- ETIM 4.0 EC001437
- UNSPSC 6.01 30211916
- UNSPSC 19.0 39122334
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Maximum altitude ≤ 2000 m
- Typical response time 10 ms
- Overvoltage category III
- Width 14 mm
- Typical release time 10 ms
- Height 80 mm
- Min. switching current 10 mA (12 V)
- Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Rated surge voltage 6 kV
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2910514
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
