2909670 Phoenix Contact Relays

2909670 Product Details

• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Degree of protection
  RT II (Relay)
• Protective circuit
  Bridge rectifier Bridge rectifier
• Type of switch contact
  Single contact
• Limiting continuous current
  6 A
• Flammability rating according to UL 94
  V0 (Housing)
• Connection method
  Push-in connection
• Designation
  Corrosive gas test
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27371600
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  94 mm
• Typical input current at UN
  3.2 mA (at UN = 230 V AC)
• Power dissipation for nominal condition
  0.74 W
• Minimum switching voltage
  5 V (at 100 mA)
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Stripping length
  8 mm
• Pollution degree
  3
• ECLASS 10.0.1
  27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
15 ms
Contact material
AgSnO
Maximum inrush current
10 A (4 s)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
Height
80 mm
Nominal input voltage UN
230 V AC
Contact type
1 changeover contact
Min. switching current
10 mA (at 12 V)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Type of note
Notes on operation
Ambient temperature (operation)
-40 °C ... 55 °C
Typical response time
7 ms
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Conductor cross section AWG
26 ... 14
ETIM 3.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ETIM 4.0
EC001437
ETIM 2.0
EC001437
UNSPSC 19.0
39122334
Mechanical service life
1x 107 cycles
UNSPSC 13.2
39122334

Product condition