Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2909651 Phoenix Contact Relays

Phoenix Contact 2909651 PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage6.2 mm PLC basic terminal block with screw conn
Phoenix Contact

Part#:2909651

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage6.2 mm PLC basic terminal block with screw conn

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2909651 Phoenix Contact price in the box on the right side or send a quick quote.

2909651 Product Details

  • Stripping length
    8 mm
  • Standards/regulations
    IEC 60664
  • Overvoltage category
    III
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • Note
    Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
  • Ambient temperature (operation)
    -40 °C ... 55 °C
  • Typical input current at UN
    3.5 mA (at UN = 120 V AC)
  • Type of switch contact
    Single contact
  • Min. switching current
    10 mA (at 12 V)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Connection method
    Screw connection
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Conductor cross section AWG
    26 ... 14
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 11.0
    27371601
  • ECLASS 9.0
    27371601
  • ETIM 3.0
    EC001437
  • UNSPSC 19.0
    39122334
  • Width
    6.2 mm
  • Degree of protection
    RT II (Relay)
  • Protective circuit
    Bridge rectifier Bridge rectifier
  • Power dissipation for nominal condition
    0.42 W
  • Limiting continuous current
    6 A
  • Flammability rating according to UL 94
    V0 (Housing)
  • Connection name
    Contact side
  • Pollution degree
    3
  • ECLASS 10.0.1
    27371601
  • ECLASS 6.0
    27371600
  • ETIM 7.0
    EC001437
  • Type of note
    Notes on operation
  • Typical response time
    6 ms
  • Contact type
    1 changeover contact
  • Minimum switching voltage
    5 V (at 100 mA)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Assembly instructions
    In rows with zero spacing
  • Screw thread
    M3
  • Designation
    Corrosive gas test
  • ECLASS 5.1
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 5.0
    27371600
  • ETIM 4.0
    EC001437
  • UNSPSC 18.0
    39122334
  • ECLASS 7.0
    27371601
  • ETIM 6.0
    EC001437
  • UNSPSC 20.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Typical release time
    15 ms
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Interrupting rating (ohmic load) max.
    140 W (at 24 V DC)
  • Operating mode
    100% operating factor
  • Mounting position
    any
  • Depth
    94 mm
  • Mechanical service life
    1x 107 cycles
  • Height
    80 mm
  • Nominal input voltage UN
    120 V AC
  • Operating voltage display
    Yellow LED
  • Contact material
    AgSnO
  • Maximum inrush current
    10 A (4 s)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo