2909649 Phoenix Contact Relays

2909649 Product Details

• Height
  80 mm
• Degree of protection
  RT II (Relay)
• Protective circuit
  Reverse polarity protection Polarity protection diode
• Contact material
  AgSnO
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Designation
  Corrosive gas test
• ECLASS 11.0
  27371601
• ECLASS 9.0
  27371601
• ETIM 3.0
  EC001437
• UNSPSC 18.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Type of switch contact
  Single contact
• Maximum inrush current
  10 A (4 s)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Standards/regulations
IEC 60664
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Type of note
Notes on operation
Typical response time
5 ms
Operating voltage display
Yellow LED
Limiting continuous current
6 A
Operating mode
100% operating factor
Screw thread
M3
Overvoltage category
III
Pollution degree
3
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 20.0
39122334
Width
6.2 mm
Typical input current at UN
9 mA
Typical release time
8 ms
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
5 V (at 100 mA)
Mechanical service life
1x 107 cycles
Stripping length
8 mm
Connection method
Screw connection
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ECLASS 6.0
27371600
ETIM 6.0
EC001437
Depth
94 mm
Nominal input voltage UN
24 V DC
Contact type
1 changeover contact
Power dissipation for nominal condition
0.22 W
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Connection name
Contact side
Conductor cross section AWG
26 ... 14
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ETIM 2.0
EC001437
UNSPSC 19.0
39122334

Product condition