Nikki Gonzales
Nick Goetz
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

2909534 Phoenix Contact Relays

Phoenix Contact 2909534 PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone C
Phoenix Contact

Part#:2909534

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone C

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 2909534 Phoenix Contact price in the box on the right side or send a quick quote.

2909534 Product Details

  • Height
    80 mm
  • Degree of protection
    RT III (Relay)
  • Width
    14 mm
  • Nominal input voltage UN
    230 V AC
  • Power dissipation for nominal condition
    1.04 W
  • Contact type
    1 changeover contact
  • Minimum switching voltage
    12 V (at 10 mA)
  • Interrupting rating (ohmic load) max. bridged
    144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
  • Operating mode
    100% operating factor
  • Connection name
    Contact side
  • Standards/regulations
    IEC 60664
  • Pollution degree
    2
  • ECLASS 5.1
    27371600
  • ECLASS 9.0
    27371601
  • ETIM 4.0
    EC001437
  • ETIM 7.0
    EC001437
  • UNSPSC 20.0
    39122334
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Insulation
    Safe isolation, reinforced insulation
  • Rated surge voltage
    6 kV
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 7.0
    27371601
  • ETIM 6.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Depth
    94 mm
  • Typical input current at UN
    4.5 mA
  • Typical release time
    10 ms
  • Type of switch contact
    Single contact
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Interrupting rating (ohmic load) max.
    240 W (at 24 V DC)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Mechanical service life
    3x 107 cycles
  • Connection method
    Push-in connection
  • Rated insulation voltage
    250 V AC
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 11.0
    27371601
  • ETIM 3.0
    EC001437
  • UNSPSC 12.01
    39121515
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Ambient temperature (operation)
    -20 °C ... 60 °C (UL)
  • Typical response time
    7 ms
  • Contact material
    AgNi
  • Limiting continuous current
    10 A
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Assembly instructions
    In rows with zero spacing
  • Stripping length
    8 mm
  • Designation
    Corrosive gas test
  • Certificate
    IECEx IBE 16.0029X
  • ECLASS 10.0.1
    27371601
  • ECLASS 6.0
    27371600
  • UNSPSC 7.0901
    39121515
  • UNSPSC 18.0
    39122334
  • Protective circuit
    Bridge rectifier Bridge rectifier
  • Operating voltage display
    Yellow LED
  • Min. switching current
    10 mA (at 12 V)
  • Maximum inrush current
    30 A (300 ms)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Mounting position
    any
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Conductor cross section AWG
    26 ... 14
  • Overvoltage category
    III
  • ECLASS 5.0
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 11
    39121515
  • UNSPSC 19.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

2909534

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo