Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

2909532 Phoenix Contact Relays

Phoenix Contact 2909532 PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Di
Phoenix Contact

Part#:2909532

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Di

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 2909532 Phoenix Contact price in the box on the right side or send a quick quote.

2909532 Product Details

  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Typical input current at UN
    18 mA
  • Protective circuit
    Reverse polarity protection Polarity protection diode
  • Contact material
    AgNi
  • Min. switching current
    10 mA (at 12 V)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Mechanical service life
    3x 107 cycles
  • Assembly instructions
    In rows with zero spacing
  • Insulation
    Safe isolation, reinforced insulation
  • Overvoltage category
    III
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 11.0
    27371601
  • ETIM 3.0
    EC001437
  • UNSPSC 19.0
    39122334
  • Width
    14 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Typical response time
    8 ms
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Stripping length
    8 mm
  • Rated insulation voltage
    250 V AC
  • REACh SVHC
    Lead 7439-92-1
  • Depth
    94 mm
  • Operating voltage display
    Yellow LED
  • Contact type
    1 changeover contact
  • Minimum switching voltage
    12 V DC (at 10 mA)
  • Interrupting rating (ohmic load) max. bridged
    144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
  • Operating mode
    100% operating factor
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Conductor cross section AWG
    26 ... 14
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 5.0
    27371600
  • ECLASS 7.0
    27371601
  • UNSPSC 11
    39121515
  • UNSPSC 18.0
    39122334
  • Ambient temperature (operation)
    -20 °C ... 60 °C (UL)
  • Degree of protection
    RT III (Relay)
  • Typical release time
    10 ms
  • Power dissipation for nominal condition
    0.43 W
  • Limiting continuous current
    10 A
  • Mounting position
    any
  • Connection method
    Push-in connection
  • Standards/regulations
    IEC 60664
  • Rated surge voltage
    6 kV
  • Certificate
    IECEx IBE 16.0029X
  • ECLASS 9.0
    27371601
  • ETIM 4.0
    EC001437
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Height
    80 mm
  • Nominal input voltage UN
    24 V DC
  • Type of switch contact
    Single contact
  • Maximum inrush current
    30 A (300 ms)
  • Interrupting rating (ohmic load) max.
    240 W (at 24 V DC)
  • Connection name
    Contact side
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Designation
    Corrosive gas test
  • Pollution degree
    2
  • ECLASS 10.0.1
    27371601
  • ECLASS 6.0
    27371600
  • ETIM 6.0
    EC001437
  • UNSPSC 6.01
    30211916
  • UNSPSC 20.0
    39122334
  • ECLASS 5.1
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • ETIM 7.0
    EC001437
  • UNSPSC 12.01
    39121515

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

2909532

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo